3.
Assemblingthe ControlHead to the Base and Handle
In this procedure you will install the ICE Flasher Series™ control head to the
base/handleassembly.
1. Placethe control headinto the gimbal bracketlocated on the base.
2. Placethe 1" diameter black washers as shown in the figure; then, thread the
gimbal knob through the bracket and washers, into the housing. Tighten the
gimbal knob to secure the ICE Flasher Series™ control head to the mount.
3. Repeatstep 2 for the otherside.
BaseArm
Knob
Washer
Washer
8