3. Assembling the Portable Bag (ICE 55 Only)
In this procedure, you will install the ICE 55 Flasher into the portable bag. The portable bag is not included with ICE 35/45 Flashers.
1.Unzip the largest opening on the front of the portable bag.
2.Insert the base/handle assembly into the portable bag, so that the Flasher Dial is facing out of the bag. For best results, pull the bag over one shoulder of the handle at a time.
3.Adjust the bag so that you can easily grab the handle, through the fabric handhold inset, from the outside top of the portable bag.
Installing the Base | Pulling the Bag | Holding the |
into the Bag | over the Handle | Portable Bag |
11
