MAINTENANCE

To keep both your ICE Flasher Series™ control head and your transducer working properly, perform the followingmaintenance tasks as needed.

ICE FLASHER SERIES™ MAINTENANCE

If your ICE Flasher Series™ unit comes into contact with salt spray, simply wipe the affected surfaces with a cloth dampened in fresh water. Do not use a chemical glass cleaner on the lens, as chemicals in the solution may cause cracking in the lens. When cleaning the LCD protective lens, use a chamois and non-abrasive, mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to avoid scratchingthe lens.

WARNING: Never leave your ICE Flasher Series™ Fishfinder in a closed car or trunk; the extremely high temperatures generated in hot weather can damage the electronics.

TRANSDUCER MAINTENANCE

If your transducer remains out of the water for a long period of time, it may take some time to wet the transducerafter it is returned to the water. Small air bubbles can cling to the surface of the transducerand interfere with proper operation. These bubbles will dissipate with time, or you may wipe the face of the transducerwith your fingers after the transducer is in the water.

32

Page 36
Image 36
Humminbird ICE 55, ICE 45, ICE 35 manual ICE Flasher Series Maintenance, Transducer Maintenance