Rackmount Solutions XRT Series manual Features

Page 10

FEATURES

Extended Battery Run Time

All models of the XRT series may add multiple optional external XRTBP battery packs to extend the time that the units can provide power. UPS de-rating is not required for the additional battery packs. The XRT600 model contains an internal battery, whereas the higher power models require at least one XRTBP battery pack.

RFI/EMI Suppression

The design features, not only the standard input line filtering, but contains a specially manufactured transformer* that shields the output from line and inverter spikes resulting from capacitive coupling between windings. This double protection insures that interference and spikes cannot get to your equipment, and conversely your equipment cannot transmit spikes to other equipment on the power line.

No Power Factor De-rating

The XRT series of UPS’s automatically support power factors in the range of 0.6 to 1.0. This means that no de-rating is required for high power factors since the unit is capable of supplying full rated power (instantaneous watts) in either the ON-LINE or On-Battery conditions.

Enhanced Battery Management

To maintain the service life of the battery, the XRT provides various features. During normal on-line functions the XRT continuously monitors the battery voltage and keeps the battery at full charge via an intelligent battery charger built into the unit. The battery’s condition is monitored at all times, and if a low battery condition is detected, the condition is reported to the front panel and to the serial communications port. If a low battery condition is detected, the unit will continue to function on the AC line. While the unit is on-line, the external battery pack(s) may be replaced without disruption to the output power. In the XRT1000, XRT1500 and XRT2000 units, the battery charge condition is reported by the battery voltage on the LCD display screen, whereas in the XRT600 unit the battery charge condition is reported by LED’s on the front panel.

Remote Communication and Control

Built into the XRT series is a Minuteman standard RS-232 communications port. With the Minuteman Power Management software, 2-way communications can be maintained with a remote computer. All pertinent data about the UPS can be transmitted to the computer, and

9

Image 10
Contents Page Page XRT Series User’s Manual Introduction Para Systems Life Support PolicyPage Please Save the Packing Materials Receiving InspectionRadio Frequency Interference Important Safety Instructions This Manual Contains Important Safety InstructionsInstructions Importantes Concernant LA Sécurité System Description Features Built in Self Test Installation Placement InstallationProtection Strategies Page INSTALLATION, Step by Step Battery Pack Connection DiagramXRT600, XRT1000, XRT1500 and XRT2000 Back panels XRT600 Front Panel Showing Load LED’s Front Panel Load Menu on LCD Screen LED Front Panel Top four LED’s Green provide 3 functions OperationFront Panels Second bottom row of LED’s provide status informationTest/Alarm Silence Button SwitchesStartup Menu Flow Status Menu Test Menu Setup Menu Config Menu Alarms and Warnings Options System Batteries Storage InstructionsBattery Replacement Troubleshooting Symptom Possible Cause Action to TakeInitial Error Messages Model XRT1000 and above error messages LCD Display Possible Cause Action to TakeOperating Faults Self Test Obtaining Service Mark the RMA # on the outside of all packages. The factoryPage General Product Specifications Cetl CSA Remote Communications Remote Direct Communications LBWBattery Pack and Runtime Specifications XRT600Load TWO R E E XRTBP1 XRTBP3 Limited Product Warranty