Rackmount Solutions XRT Series manual Operation, Front Panels

Page 18

4. OPERATION

FRONT PANELS

The operation of the UPS depends on which front panel is used. The following section explains the operation for the LED and the LCD front panels.

LED Front Panel

The top four LED’s (Green) provide 3 functions.

During normal AC operation: The top LED’s indicate a measure of load.

During battery mode: The top LED’s indicate the battery charge condition which indicates approximate battery power remaining.

During a fault condition: The top LED’s display an error code.

The second (bottom) row of LED’s provide status information.

AC normal LED: Glows green when normal AC is available to the unit.

Regulator LED: Glows yellow when AC is present but outside normal range.

On battery LED: Glows red when the unit is supplying power from the batteries (Inverter on).

Low battery LED: Glows red when the batteries are weak and need charging or replacement.

All LED’s off: This indicates the unit is turned off or an error condition has occurred. If an error has occurred, the internal alarm will sound and an error code will be displayed on the upper four LED’s. Refer to the TROUBLESHOOTING section for a description of the error code and the appropriate action to take.

17

Image 18
Contents Page Page XRT Series User’s Manual Introduction Para Systems Life Support PolicyPage Receiving Inspection Please Save the Packing MaterialsRadio Frequency Interference Important Safety Instructions This Manual Contains Important Safety InstructionsInstructions Importantes Concernant LA Sécurité System Description Features Built in Self Test Installation Installation PlacementProtection Strategies Page INSTALLATION, Step by Step Battery Pack Connection DiagramXRT600, XRT1000, XRT1500 and XRT2000 Back panels XRT600 Front Panel Showing Load LED’s Front Panel Load Menu on LCD Screen LED Front Panel Top four LED’s Green provide 3 functions OperationFront Panels Second bottom row of LED’s provide status informationSwitches Test/Alarm Silence ButtonStartup Menu Flow Status Menu Test Menu Setup Menu Config Menu Alarms and Warnings Options System Batteries Storage InstructionsBattery Replacement Troubleshooting Symptom Possible Cause Action to TakeInitial Error Messages Model XRT1000 and above error messages LCD Display Possible Cause Action to TakeOperating Faults Self Test Obtaining Service Mark the RMA # on the outside of all packages. The factoryPage General Product Specifications Cetl CSA Remote Communications Remote Direct Communications LBWBattery Pack and Runtime Specifications XRT600Load TWO R E E XRTBP1 XRTBP3 Limited Product Warranty