Onkyo TX-SR703E, TX-SR8370 Speaker Distance, Buttons to select each speaker, Buttons to specify

TX-SR803_En.book Page 72 Friday, August 26, 2005 9:26 AM

Advanced Setup—Continued

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 40).

With these settings, you can specify the distance from each speaker to the listening position.

1	RECEIVER	Press the [RECEIVER] REMOTE
		MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

4

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “a. Unit,” and then use the Left and Right

[]/[ ] buttons to select:

feet: Select if you want to enter distances in feet. Can be set from 1 to 30 feet in 1-foot steps.

meters: Select if you want to enter distances in meters. Can be set from 0.3 to 9 meters in 0.3-meter steps.

2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Speaker

5	Use the Up and Down [ ]/[ ]
	buttons to select each speaker

ENTER	and then use the Left and Right
	[ ]/[ ] buttons to specify the
	distance.

ENTER

ENTER

Setup,” and then press [ENTER].

The Speaker Setup menu appears.

Specify the distance from the speaker

to your listening position.

ENTER

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “Speaker Dis- tance,” and then press [ENTER].

The Speaker Distance menu appears.

3-3.Speaker Distance

------------------------

a.Unit	:feet
b.Left	:12ft
c.Center	:12ft
d.Right	:12ft
e.Surround R	: 7ft
f.SurrBack R	: 7ft
g.SurrBack L	: 7ft
h.Surround L	: 7ft
i.Subwoofer	:12ft

Note:

Speakers that you set to No or None on the Speaker Config menu (page 70) cannot be selected.

6	Repeat step 5 for all speakers.
7	Press the [SETUP] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

72