Onkyo TX-NR809 Only the front speakers produce sound, Only the center speaker produces sound

Page 80

■Only the front speakers produce sound

When the Stereo or Mono listening mode is selected,

—

only the front speakers and subwoofer produce

 

sound.

 

 

 

In the Mono listening mode, only the front speakers

51

output sound if the “Output Speaker” setting is set

 

to “Left / Right”.

 

Check the Speaker Configuration.

48

■Only the center speaker produces sound

If you use the Dolby Pro Logic IIx Movie, Dolby Pro — Logic IIx Music, or Dolby Pro Logic IIx Game listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker.

In the Mono listening mode, only the center speaker

51

output sound if the “Output Speaker” setting is set

 

to “Center”.

 

Make sure the speakers are configured correctly.

48

■The surround speakers produce no sound

When the T-D (Theater-Dimensional), Stereo or

—

Mono listening mode is selected, the surround

 

speakers produce no sound.

 

 

 

Depending on the source and current listening mode,

—

not much sound may be produced by the surround

 

speakers. Try selecting another listening mode.

 

Make sure the speakers are configured correctly.

48

■The center speaker produces no sound

When the Stereo or Mono listening mode is selected,

—

the center speaker produces no sound.

 

 

 

In the Mono listening mode, only the front speakers

51

output sound if the “Output Speaker” setting is set

 

to “Left / Right”.

 

Make sure the speakers are configured correctly.

48

■The front high, front wide and surround back speakers produce no sound

Depending on the current listening mode, no sound

35

may be produced by the front high, front wide and

 

surround back speakers. Select another listening

 

mode.

 

 

Depending on the sound source, the sound produced —

by the front high, front wide and surround back

 

speakers may be weak.

 

Make sure the speakers are configured correctly.

48

 

 

While the “Powered Zone 2” setting is set to “Yes”,

66

playback in the main room is reduced to 5.1-

 

channels and the front wide and surround back

 

speakers produce no sound.

 

 

 

■ The subwoofer produces no sound

When you play a source material that contains no

—

information in the LFE channel, the subwoofer

 

produces no sound.

 

 

 

Make sure the speakers are configured correctly.

48

 

 

■There’s no sound with a certain signal format

 

Check the digital audio output setting on the

—

 

connected device. On some game consoles, such as

 

En

those that support DVD, the default setting is off.

 

With some DVD-Video discs, you need to select an — audio output format from a menu.

Depending on the input signal, some listening modes 35–39cannot be selected.

■Can’t select the Pure Audio listening mode

The Pure Audio listening mode cannot be selected — while Zone 2/3 is on.

■ Can’t get 6.1/7.1 playback

If no surround back speakers, front wide and front

—

high speakers are connected, or the Zone 2 speakers

 

are being used, 6.1/7.1 playback is not possible.

 

 

 

Depending on the number of connected speakers, it

35–39

is not always possible to select all of the listening

 

modes.

 

 

 

■The speaker volume cannot be set as required

Check to see if a maximum volume has been set.

59

If the volume level of each individual speaker has

31, 49

been adjusted to high positive values, then the

 

maximum master volume possible may be reduced.

 

Note that the individual speaker volume levels are

 

set automatically after the Audyssey MultEQ® XT

 

Room Correction and Speaker Setup has been

 

performed.

 

 

 

■ Noise can be heard

Using cable ties to bundle audio cables with power — cords, speaker cables, and the like may degrade the audio performance, so refrain from doing it.

An audio cable may be picking up interference. Try — repositioning your cables.

■The Late Night function doesn’t work

Make sure the source material is Dolby Digital,

64

Dolby Digital Plus, and Dolby TrueHD.

 

■The analog multichannel input doesn’t work

Check the multichannel input connections.

—

Make sure that the multichannel input is selected.

57

Check the audio output settings on your source

—

component.

 

■ About DTS signals

When DTS program material ends and the DTS

—

bitstream stops, the AV receiver remains in DTS

 

listening mode and the DTS indicator remains on.

 

This is to prevent noise when you use the pause, fast

 

forward, or fast reverse function on your player. If

 

you switch your player from DTS to PCM, because

 

the AV receiver does not switch formats

 

immediately, you may not hear any sound, in which

 

case you should stop your player for about three

 

seconds, and then resume playback.

 

With some CD and LD players, you won’t be able to — playback DTS material properly even though your player is connected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver doesn’t recognize it as a genuine DTS signal. In such cases, you may hear noise.

80

Page 79 Page 81
Image 80
Page 79 Page 81
Contents TX-NR809 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Installing the batteriesAiming the remote controller TransmissionContents Features Services available may vary depending on the regionAmplifier ProcessingTHX Select2 Plus Front & Rear Panels Front PanelNorth American and Taiwan models European, Australian and Asian modelsDisplay Rear Panel Front L/R, CENTER, Surr L/R, SB/FH/FW SubwooferZone 2 and Zone 3 PRE/LINE OUT jacks Front L/R, CENTER, Surr L/RRemote Controller Controlling the AV ReceiverDimmer button Display button Muting button Controlling the tunerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Number SpeakersUsing Dipole Speakers Using a Powered SubwooferBi-amping the Front Speakers TipConnecting a Power Amplifier Connecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Audio Return Channel ARC functionJack Components Assignable Audio Return Channel is set to AutoConnecting Your Components EFGHow to record a video source Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordPlug the power cord into an AC wall outlet North AmericanAV receiver enters standby mode Turning On/Off the AV ReceiverTurning On Turning OffSelecting the Language for the Onscreen Setup Menus Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentEnter Understanding Icons on the DisplayPlaying an iPod/iPhone via USB Playing a USB Device Listening to Internet RadioTop menu of Internet Radio Listening to Other Internet RadioRegistering My Favorites*1 Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioMode Presetting AM/FM StationsUsing RDS excluding North American and Taiwan models Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure First measurement positionWhen you’ve finished making the settings, press ` CancelUse q/wto select a target, and use e/rto change the setting Press Enter Disconnect the speaker setup microphoneError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDTS DSD*6Audyssey DSX *8 THXListening Mode Description Input Speaker Source Layout Setting the Display Brightness Using the Home MenuUsing the Sleep Timer Using the Whole House Mode Displaying Source InformationChanging the Input Display VCR/DVRUsing Headphones Selecting Speaker LayoutMuting the AV Receiver Press Receiver followed by SP Layout repeatedly to selectUsing Easy Macros RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory NotesInput/Output Assign Monitor OutHdmi Input Component Video InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Setup Speaker SettingsDigital Audio Input Analog Audio InputSubwoofer Phase FrontCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Wireless Subwoofer Speaker DistanceLevel Calibration UnitBGC Equalizer SettingsTHX Audio Setup Dolby Audio AdjustMultiplex/Mono LFE Level Theater-DimensionalAudyssey DSX Source Setup AudysseyName Edit IntelliVolumeSync Picture Adjust To correct a characterWide Mode*1*2 Picture Mode*1Resolution*3*5 Game Mode*3*4*5Film Mode*3*5*6 Edge Enhancement*3*5*6Audio Selector Listening Mode Preset Charge ModeHardware Setup Volume SetupOSD Setup MiscellaneousMulti Zone TunerAuto Standby Audio TV OutAudio Return Channel Lip SyncDhcp Firmware UpdateNetwork Using the Audio Settings Remote Controller SetupLock Setup Late Night Dolby VolumeSpeaker Levels Music Optimizer Re-EQMusic Optimizer Re-EQConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierMulti Zone Making Multi Zone Connections8RECEIVER Operating on the remote controllerControlling Zone 2/3 Components Muting Zones Adjusting the Volume for ZonesAdjusting the Tone and Balance of Zone Using a Multiroom Kit with Other Components Using a Multiroom Kit with ZoneUsing a Multiroom Kit with a Cabinet UP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Controlling Your iPod/iPhone RI DockAvailable buttons RandomLooking up for Remote Control Code Press Receiver followed by SetupUse q/wto select a category, and then press Use q/w/e/rto select a character, and then pressEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsEnter Setup Search Repeat Random Mode VCR/PVR8SOURCE*1 Input Guide TOP MenuLearning Commands Deleting Acquired CommandsFollowing buttons cannot learn new commands RemoteUsing Normal Macros Making MacrosRunning Macros Deleting MacrosAudio TroubleshootingPower There’s no sound with a certain signal format Can’t select the Pure Audio listening modeSpeaker volume cannot be set as required About DTS signalsTuner Remote ControllerVideo UP-A1 Dock for iPod/iPhone RecordingZone 2/3 Music Server and Internet RadioUSB Device Playback OthersImportant Note Regarding Video Playback Component Video Monitor OUTFirmware Update Update procedureUpdating the Firmware via Network Before you startUpdating the Firmware via USB TroubleshootingErrors during an update via network Press Receiver followed by Setup on Remote controller Using 8ON/STANDBY on the front panel, turnErrors during an update via USB Select via USB and press EnterConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats OUTVideo Resolution Chart OutputOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iOperations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerAbout Copyright Protection About HdmiSupported Audio Formats Network Requirements Network/USB FeaturesConnecting to the Network Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaSpecifications Amplifier Section Tuner SectionVideo Section GeneralAudio Outputs OthersMemo 4 0 0 7 0
Top Page Image Contents