Onkyo TX-NR809 Specifications, Amplifier Section Tuner Section, Video Section, General, Hdmi

Page 97

Specifications

Amplifier Section

 

Tuner Section

Rated Output Power

All channels: (North American)

135 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

160 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

145 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(Others)

7 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Asian)

7 ch × 230 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

300 W (3 , Front)

 

250 W (4 , Front)

 

150 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance)

200 mV/47 k(LINE)

2.5 mV/47 k(PHONO MM)

Rated RCA Output Level and Impedance

200 mV/470 (PRE OUT)

Maximum RCA Output Level and Impedance 4.6 V/470 (PRE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5%)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

110 dB (LINE, IHF-A)

 

80 dB (PHONO MM, IHF-A)

Speaker Impedance

4 or 6 - 16

Video Section

Input Sensitivity/Output Level and Impedance

1Vp-p/75 (Component and S-Video Y) 0.7 Vp-p/75 (Component PB/CB, PR/CR) 0.25 Vp-p/75 (S-Video C)

1Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Others)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

 

 

 

Power Supply

(North American)

 

AC 120 V, 60 Hz

 

(Others)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 7.5 A

 

(Others) 710 W

No-sound Power Consumption

(North American) 95 W

(Others) 100 W

Stand-by Power Consumption

 

(North American)

 

0.2 W

 

(Others)

 

0.3 W

Dimensions (W × H × D)

 

435 mm × 198.5 mm × 435.5 mm

 

17-1/8" × 7-13/16" × 17-1/8"

Weight

18.3 kg (40.3 lbs.)

HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7,

 

AUX INPUT

Output

OUT MAIN, OUT SUB

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

Video Inputs

Component

IN 1, IN 2

S-Video

BD/DVD, VCR/DVR, CBL/SAT, GAME

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Analog RGB

PC IN

Video Outputs

Component

MONITOR OUT

S-Video

MONITOR OUT, VCR/DVR OUT

Composite

MONITOR OUT, VCR/DVR OUT

Audio Inputs

 

Digital

Optical: 2 (Rear), 1(Front)

 

Coaxial: 3

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

PC, TV/CD, PHONO, AUX

Multichannel Inputs

7.1

En

97

Image 97
Contents TX-NR809 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Installing the batteries Supplied AccessoriesAiming the remote controller TransmissionContents Services available may vary depending on the region FeaturesAmplifier ProcessingTHX Select2 Plus Front Panel Front & Rear PanelsNorth American and Taiwan models European, Australian and Asian modelsDisplay Front L/R, CENTER, Surr L/R, SB/FH/FW Subwoofer Rear PanelZone 2 and Zone 3 PRE/LINE OUT jacks Front L/R, CENTER, Surr L/RControlling the AV Receiver Remote ControllerDimmer button Display button Muting button Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Number SpeakersUsing a Powered Subwoofer Using Dipole SpeakersBi-amping the Front Speakers TipConnecting a Power Amplifier About AV Connections Connecting AV componentsAV Cables and Jacks Hdmi cableAudio Return Channel ARC function Connecting Components with HdmiJack Components Assignable Audio Return Channel is set to AutoEFG Connecting Your ComponentsJack/Port Components Assignable How to record a video sourceConnecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting the AntennasPlug the power cord into an AC wall outlet North AmericanTurning On/Off the AV Receiver AV receiver enters standby modeTurning On Turning OffControlling Contents of USB or Network Devices Selecting the Language for the Onscreen Setup MenusPlayback Playing the Connected ComponentPlaying an iPod/iPhone via USB Understanding Icons on the DisplayEnter Listening to Internet Radio Playing a USB DeviceRegistering My Favorites*1 Listening to Other Internet RadioTop menu of Internet Radio Windows Media Player 12 Setup Windows Media Player 11 SetupPlaying Music Files on a Server Remote PlaybackUsing the Tuner Using Remote PlaybackTuning into Radio Stations Listening to AM/FM RadioUsing RDS excluding North American and Taiwan models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure First measurement position` Cancel When you’ve finished making the settings, pressUse q/wto select a target, and use e/rto change the setting Press Enter Disconnect the speaker setup microphoneChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesAbout Listening Modes Following audio formats are supported by the listening modeExplanatory Notes Input SourceListening Modes Onkyo-Original DSP Listening ModesDSD*6 DTSTHX Audyssey DSX *8Listening Mode Description Input Speaker Source Layout Using the Sleep Timer Using the Home MenuSetting the Display Brightness Displaying Source Information Using the Whole House ModeChanging the Input Display VCR/DVRSelecting Speaker Layout Using HeadphonesMuting the AV Receiver Press Receiver followed by SP Layout repeatedly to selectRecording Using Easy MacrosOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesMonitor Out Input/Output AssignComponent Video Input Hdmi InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Settings Speaker SetupDigital Audio Input Analog Audio InputFront Subwoofer PhaseCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Speaker Distance Wireless SubwooferLevel Calibration UnitTHX Audio Setup Equalizer SettingsBGC Multiplex/Mono Audio AdjustDolby Audyssey DSX Theater-DimensionalLFE Level Audyssey Source SetupSync IntelliVolumeName Edit To correct a character Picture AdjustWide Mode*1*2 Picture Mode*1Game Mode*3*4*5 Resolution*3*5Film Mode*3*5*6 Edge Enhancement*3*5*6Audio Selector Charge Mode Listening Mode PresetVolume Setup Hardware SetupOSD Setup MiscellaneousTuner Multi ZoneAudio TV Out Auto StandbyAudio Return Channel Lip SyncNetwork Firmware UpdateDhcp Lock Setup Remote Controller SetupUsing the Audio Settings Speaker Levels Dolby VolumeLate Night Re-EQ Music OptimizerMusic Optimizer Re-EQConnecting the Zone Speakers to an Additional Amplifier Connecting Your Zone 2 Speakers Directly to the AV receiverMulti Zone Making Multi Zone ConnectionsControlling Zone 2/3 Components Operating on the remote controller8RECEIVER Adjusting the Tone and Balance of Zone Adjusting the Volume for ZonesMuting Zones Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhoneRandom Available buttonsPress Receiver followed by Setup Looking up for Remote Control CodeUse q/wto select a category, and then press Use q/w/e/rto select a character, and then pressEntering Remote Control Codes Resetting Remote Mode Buttons Remote Control Codes for Onkyo Components Connected via uResetting the Remote Controller Controlling Other ComponentsVCR/PVR Enter Setup Search Repeat Random Mode8SOURCE*1 Input Guide TOP MenuDeleting Acquired Commands Learning CommandsFollowing buttons cannot learn new commands RemoteMaking Macros Using Normal MacrosRunning Macros Deleting MacrosPower TroubleshootingAudio Can’t select the Pure Audio listening mode There’s no sound with a certain signal formatSpeaker volume cannot be set as required About DTS signalsVideo Remote ControllerTuner Recording UP-A1 Dock for iPod/iPhoneZone 2/3 Music Server and Internet RadioOthers USB Device PlaybackComponent Video Monitor OUT Important Note Regarding Video PlaybackUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startErrors during an update via network TroubleshootingUpdating the Firmware via USB Using 8ON/STANDBY on the front panel, turn Press Receiver followed by Setup on Remote controllerErrors during an update via USB Select via USB and press EnterVideo Connection Formats Connection Tips and Video Signal PathOUT Audio Connection FormatsOutput Video Resolution ChartOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iAbout p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerSupported Audio Formats About HdmiAbout Copyright Protection Connecting to the Network Network/USB FeaturesNetwork Requirements USB Device Requirements Server RequirementsServer playback Remote playbackAbout Dlna Supported Audio File FormatsAmplifier Section Tuner Section SpecificationsVideo Section GeneralOthers Audio OutputsMemo 4 0 0 7 0