Onkyo Complete Guide to Firmware Updates for TX-NR809 Models

Page 85

Firmware Update

To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before proceeding with the update, please read the corresponding explanations carefully.

Update via network

You need a wired Internet connection to update the firmware.

Update via USB storage (page 86)

Please prepare a USB storage device such as a USB flash memory stick. You need at least 32 MB of available space to update the firmware.

Note

Check the network connection before updating.

Do not touch the any cable or device connected to the AV receiver during the update process.

Do not attempt to access the AV receiver from your PC while it is being updated.

Do not shutdown the power of the AV receiver while it is being updated.

The storage media in the USB card reader may not work.

If the USB device is partitioned, each section will be treated as an independent device.

If the USB device contains a lot of data, the AV receiver may take a while to read it.

Operation is not guaranteed for all USB devices, which includes the ability to power them.

Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a USB device with the AV receiver. Onkyo recommends that you back up your important music files beforehand.

If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it.

USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via a USB hub.

USB devices with security functions are not supported.

Limitation of liability

The program and accompanying online documentation are furnished to you for use at your own risk. Onkyo will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will Onkyo be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.

See the Onkyo web site for latest information.

Updating the Firmware via Network

The AV receiver allows you to update the firmware using network connection on the rear panel.

Note

Make sure your AV receiver and TV are turned on and an Ethernet cable is connected to the rear panel of the AV receiver.

Never unplug or turn off the AV receiver while it is being updated.

Never plug or unplug an HDMI or Ethernet cable during the update process.

Do not attempt to access the AV receiver from your PC while it is being updated.

Never unplug the power cord during the update process.

It takes maximum 60 minutes to complete the firmware update.

The AV receiver will retain all your settings after the update is finished.

Before you start

Set the “HDMI Control(RIHD)” setting to “Off” (page 60).

Turn off the controller device connected via RS232C and via Ethernet network.

Turn off Zone 2 and Zone 3.

Stop playback of contents from Internet Radio, iPod/iPhone, USB or servers, etc.

Update procedure

1

Press RECEIVER followed by SETUP on the

 

remote controller.

 

The Setup menu will be displayed on the TV screen.

 

The procedures thereafter can also be performed on

 

the AV receiver by using its SETUP, arrow and

 

ENTER buttons.

2

Select “Hardware Setup” and press ENTER.

3

Select “Firmware Update” and press ENTER.

 

Note that the “Firmware Update” option will be

 

grayed out for a short while after the AV receiver is

 

turned on. Please wait until it becomes operable.

4

Select “via NET” and press ENTER.

5

Select “Update” and press ENTER.

 

The update process will begin.

 

During the update process, the on-screen display

 

may disappear depending on the updated program.

 

When this occurs, you can still view the update

 

progress on the front display of the AV receiver. The

 

on-screen display will reappear after the update is

 

complete, and upon turning the AV receiver off and

 

on again.

6

The message “Completed!” appears on the front

 

display of the AV receiver, indicating that the

update has been completed.

En

85

Image 85
Contents TX-NR809 10 cm 4 at the rear. The rear edge of the shelf or Local regulations when disposing of batteriesBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Installing the batteries Supplied AccessoriesAiming the remote controller TransmissionContents Services available may vary depending on the region FeaturesAmplifier ProcessingTHX Select2 Plus Front Panel Front & Rear PanelsNorth American and Taiwan models European, Australian and Asian modelsDisplay Front L/R, CENTER, Surr L/R, SB/FH/FW Subwoofer Rear PanelZone 2 and Zone 3 PRE/LINE OUT jacks Front L/R, CENTER, Surr L/RControlling the AV Receiver Remote ControllerDimmer button Display button Muting button Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Number SpeakersUsing a Powered Subwoofer Using Dipole SpeakersBi-amping the Front Speakers TipConnecting a Power Amplifier About AV Connections Connecting AV componentsAV Cables and Jacks Hdmi cableAudio Return Channel ARC function Connecting Components with HdmiJack Components Assignable Audio Return Channel is set to AutoEFG Connecting Your ComponentsJack/Port Components Assignable How to record a video sourceConnecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting the AntennasPlug the power cord into an AC wall outlet North AmericanTurning On/Off the AV Receiver AV receiver enters standby modeTurning On Turning OffControlling Contents of USB or Network Devices Selecting the Language for the Onscreen Setup MenusPlayback Playing the Connected ComponentPlaying an iPod/iPhone via USB Understanding Icons on the DisplayEnter Listening to Internet Radio Playing a USB DeviceRegistering My Favorites*1 Listening to Other Internet RadioTop menu of Internet Radio Windows Media Player 12 Setup Windows Media Player 11 SetupPlaying Music Files on a Server Remote PlaybackUsing the Tuner Using Remote PlaybackTuning into Radio Stations Listening to AM/FM RadioUsing RDS excluding North American and Taiwan models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure First measurement position` Cancel When you’ve finished making the settings, pressUse q/wto select a target, and use e/rto change the setting Press Enter Disconnect the speaker setup microphoneChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesAbout Listening Modes Following audio formats are supported by the listening modeExplanatory Notes Input SourceListening Modes Onkyo-Original DSP Listening ModesDSD*6 DTSTHX Audyssey DSX *8Listening Mode Description Input Speaker Source Layout Using the Sleep Timer Using the Home MenuSetting the Display Brightness Displaying Source Information Using the Whole House ModeChanging the Input Display VCR/DVRSelecting Speaker Layout Using HeadphonesMuting the AV Receiver Press Receiver followed by SP Layout repeatedly to selectRecording Using Easy MacrosOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesMonitor Out Input/Output AssignComponent Video Input Hdmi InputBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Settings Speaker SetupDigital Audio Input Analog Audio InputFront Subwoofer PhaseCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Speaker Distance Wireless SubwooferLevel Calibration UnitTHX Audio Setup Equalizer SettingsBGC Multiplex/Mono Audio AdjustDolby Audyssey DSX Theater-DimensionalLFE Level Audyssey Source SetupSync IntelliVolumeName Edit To correct a character Picture AdjustWide Mode*1*2 Picture Mode*1Game Mode*3*4*5 Resolution*3*5Film Mode*3*5*6 Edge Enhancement*3*5*6Audio Selector Charge Mode Listening Mode PresetVolume Setup Hardware SetupOSD Setup MiscellaneousTuner Multi ZoneAudio TV Out Auto StandbyAudio Return Channel Lip SyncNetwork Firmware UpdateDhcp Lock Setup Remote Controller SetupUsing the Audio Settings Speaker Levels Dolby VolumeLate Night Re-EQ Music OptimizerMusic Optimizer Re-EQConnecting the Zone Speakers to an Additional Amplifier Connecting Your Zone 2 Speakers Directly to the AV receiverMulti Zone Making Multi Zone ConnectionsControlling Zone 2/3 Components Operating on the remote controller8RECEIVER Adjusting the Tone and Balance of Zone Adjusting the Volume for ZonesMuting Zones Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneUsing a Multiroom Kit with Other Components IPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock RI Dock Controlling Your iPod/iPhoneRandom Available buttonsPress Receiver followed by Setup Looking up for Remote Control CodeUse q/wto select a category, and then press Use q/w/e/rto select a character, and then pressEntering Remote Control Codes Resetting Remote Mode Buttons Remote Control Codes for Onkyo Components Connected via uResetting the Remote Controller Controlling Other ComponentsVCR/PVR Enter Setup Search Repeat Random Mode8SOURCE*1 Input Guide TOP MenuDeleting Acquired Commands Learning CommandsFollowing buttons cannot learn new commands RemoteMaking Macros Using Normal MacrosRunning Macros Deleting MacrosPower TroubleshootingAudio Can’t select the Pure Audio listening mode There’s no sound with a certain signal formatSpeaker volume cannot be set as required About DTS signalsVideo Remote ControllerTuner Recording UP-A1 Dock for iPod/iPhoneZone 2/3 Music Server and Internet RadioOthers USB Device PlaybackComponent Video Monitor OUT Important Note Regarding Video PlaybackUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startErrors during an update via network TroubleshootingUpdating the Firmware via USB Using 8ON/STANDBY on the front panel, turn Press Receiver followed by Setup on Remote controllerErrors during an update via USB Select via USB and press EnterVideo Connection Formats Connection Tips and Video Signal PathOUT Audio Connection FormatsOutput Video Resolution ChartOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iAbout p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerSupported Audio Formats About HdmiAbout Copyright Protection Connecting to the Network Network/USB FeaturesNetwork Requirements USB Device Requirements Server RequirementsServer playback Remote playbackAbout Dlna Supported Audio File FormatsAmplifier Section Tuner Section SpecificationsVideo Section GeneralOthers Audio OutputsMemo 4 0 0 7 0