LG Electronics BX220-JD owner manual Turning on the Projector, Turning off the Projector

Page 15

Installing and Composition

Turning on the Projector

1.Connect power cord correctly.

2.Remove the lens cover of the projector.

3.Press the POWER button on the remote control or top cover. (Green operation indicator flashes during cooling of the lamp.)

●It will take about 12 second to display the picture after power on because the projector lamp has to warm up.

●An image will appear after the operation indicator light turns (Green).

●Select the source mode with the SOURCE button.

●Leave the projector plugged in for at least 2 minutes after switching off the projector, as this will allow the lamp cooling to continue which will help to preserve the lamp life.

* Don’t unplug the power cord while the ventilation fan (inlet/outlet) is working. If so, you take longer time by lamp on.

Turning off the Projector

1.Press the POWER button on the top cover or remote control.

2.Press the POWER button on the top cover or remote control again to cut off the power.

3.If the operation indicator LED is orange and blinking, do not disconnect the mains supply until the operation indicator LED is lit up constantly (orange).

●If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not operate.

Power Off?

Please Press Key Again.

ENGLISH

15

Image 15

Contents BX220-JD Class a digital device DLP ProjectorContents Safety Instructions Do not allow any objects to fall into the projector Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not use too many plugs on the Mains multi-outletDo not drop the projector or allow impact shock Do not use water while cleaning the projectorIs not to be used for a long peri Service personnel Only use the specified type of batteryConnecting Part Names of partsMain Body Control Panel Installing Batteries Remote ControlProjector Status Indicators Optional Extras AccessoriesProvide proper ventilation for this projector Installation and CompositionInstallation Instructions Don’t place the projector where it can be covered with dustProjection distance based on the picture format Basic Operation of the ProjectorUsing Kensington Security System Turning off the Projector Turning on the ProjectorEach press of the F, G button changes the display as below Selecting source modeFocus and Position of the Screen Image Zoom ring Focus ringConnect computer cable to RGB Input PC/DTV of the projector Connecting to a Desktop PCConnecting to a Notebook PC ConnectionRGB Input PC/DTV of the projector Connecting to a Video SourceConnecting to a DVD Connecting to a D-TV Set-Top BoxFunction Adjusting VideoFunction APC Auto Picture ControlAuto Color Temperature Control White Peaking FunctionGamma Function Selecting language Flip Horizontal FunctionFlip Vertical Function Using ARC Function Using Keystone functionAuto Source Function Using Blank function Lamp Mode FunctionSelecting Blank Image color Using Still function Checking lamp timeMoving Image Still Image Clock / Phase Function Auto Tracking FunctionScreen Position How to connect external control equipment Communication Parameter SetupRS-232C Communication Protocol Command Reference ListScreen Mute Command2d Power Command2aInput Select Command2b Aspect Ratio Command2cSharpness Command2k Brightness Command2hColor Command2i Tint Command2jBlue ADC gain Adjustment Color B Command2z Red ADC gain Adjustment Color R Command2wLow Power Command2q Green ADC gain Adjustment Color G Command2ySupported Monitor Display InformationDVD/DTV Input Cleaning the lens MaintenanceMemo Memo Projector Lamp SpecificationsBX220-JD Operating Condition