LG Electronics BX220-JD owner manual Projector Status Indicators

Page 10

Names of parts

Projector Status Indicators

*Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector.

Lamp Indicator

Operation Indicator Temperature Indicator

		Orange	Standby.
	Operation Indicator	Green(flashing)	Lamp cooling until the lamp turn on.
	Operation Indicator	Green	On operation. (Turn on the lamp)
		Orange(flashing)	Projector lamp is cooling as power out (2 minutes)
		Off	Power off.
		Red	Projector lamp is reaching the end of its life and needs
		Red	to be replaced with a new lamp. (over 2000 hours)
			to be replaced with a new lamp. (over 2000 hours)
	Lamp Indicator		The projector has trouble in the lamp or around it at
	Lamp Indicator	Red(flashing)	power-on. Retry Power On again later. If lamp indicator
		Red(flashing)	power-on. Retry Power On again later. If lamp indicator
			is red (flashing) again, contact the service center.
		Green(flashing)	The lamp cover is not closed.
		Orange	This projector is in high temperature. Turn the power of
		Orange	projector off and check the ventilator.
			projector off and check the ventilator.
	Temperature Indicator	Red	The projector is turned off as its high temperature.
		Red (flashing)	Power has turned off due to problem with the
		Red (flashing)	internal cooling fan. Contact your service center.
			internal cooling fan. Contact your service center.

10

Image 10

Contents BX220-JD DLP Projector Class a digital deviceContents Safety Instructions Do not use too many plugs on the Mains multi-outlet Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not allow any objects to fall into the projectorOnly use the specified type of battery Do not use water while cleaning the projectorIs not to be used for a long peri Service personnel Do not drop the projector or allow impact shockNames of parts Connecting PartMain Body Control Panel Remote Control Installing BatteriesProjector Status Indicators Accessories Optional ExtrasDon’t place the projector where it can be covered with dust Installation and CompositionInstallation Instructions Provide proper ventilation for this projectorBasic Operation of the Projector Projection distance based on the picture formatUsing Kensington Security System Turning on the Projector Turning off the ProjectorZoom ring Focus ring Selecting source modeFocus and Position of the Screen Image Each press of the F, G button changes the display as belowConnection Connecting to a Desktop PCConnecting to a Notebook PC Connect computer cable to RGB Input PC/DTV of the projectorConnecting to a D-TV Set-Top Box Connecting to a Video SourceConnecting to a DVD RGB Input PC/DTV of the projectorAPC Auto Picture Control Adjusting VideoFunction FunctionWhite Peaking Function Auto Color Temperature ControlGamma Function Flip Horizontal Function Selecting languageFlip Vertical Function Using Keystone function Using ARC FunctionAuto Source Function Lamp Mode Function Using Blank functionSelecting Blank Image color Checking lamp time Using Still functionMoving Image Still Image Auto Tracking Function Clock / Phase FunctionScreen Position Communication Parameter Setup How to connect external control equipmentRS-232C Command Reference List Communication ProtocolAspect Ratio Command2c Power Command2aInput Select Command2b Screen Mute Command2dTint Command2j Brightness Command2hColor Command2i Sharpness Command2kGreen ADC gain Adjustment Color G Command2y Red ADC gain Adjustment Color R Command2wLow Power Command2q Blue ADC gain Adjustment Color B Command2zInformation Supported Monitor DisplayDVD/DTV Input Maintenance Cleaning the lensMemo Memo Operating Condition SpecificationsBX220-JD Projector Lamp