Function
Special Menu Options
Using ARC Function
1.Press the ARC button.
Each press of the button changes the display as below.
F16 : 9 G
16:9
F4 : 3 G
4 : 3
You can also use this function by using the MENU button.
Using Keystone function
*Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
*Only use the Keystone function when you can’t get the best angle of projection, because it may cause a blazing fire of the screen.
1.Press the KEYSTONE + or KEYSTONE - button.
2.Press the KEYSTONE + or KEYSTONE - button to adjust the screen condition as you want.
Keystone 0
●Keystone are adjusted from
●You can also use this function by using the MENU button.
Auto Source Function
* Automatically detects the projector input signal.
1.Press the MENU button and then use F, G button to select the 
menu.
2.Press the OK (A) button and then use D, E button to select Auto Source item.
3.Press the F, G button to select On or Off.
● To exit the menu display, repeatedly, press the MENU button.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keystone | 0 |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
Auto Source | F |
|
| Off | G | |||
Blank Image | F |
|
| Blue | G | |||
Lamp Mode | F |
| Normal mode | G | ||||
Lamp Time |
|
|
|
| 0 Hr |
| ||
MENU prev. | move |
| F G select |
| ||||
|
|
|
|
|
|
|
|
|
22