Safety Instructions
| Using | WARNING |
|
|
|
Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It can cause a fire or a burn by a spark.
Do not drop the projector or allow impact shock.
This may cause mechanical failure or personal injury !
Don’t look at laser beam directly as it can cause eye damage!
| Using | NOTES |
|
|
|
Do not place heavy objects on top of projector.
This may cause mechanical failure or personal injury!
Take care not to cause impact to the lens particularly when moving the projector.
Do not touch the lens of the pro- jector. It is delicate and easily damaged.
Do not use any sharp tools on the projector as this will damage the casing.
| Cleaning | WARNING |
|
|
|
Do not use water while cleaning the projector
This may cause damage to the projector or an electric shock hazard.
In the unlikely event of smoke or a strange smell from the projec- tor, switch it off , unplug it from the wall outlet and contact your dealer or service centre.
This may cause a fire or an electric shock hazard !
Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens.
| Cleaning | NOTES |
|
|
|
Contact the Service Center once a year to clean the internal parts of the projector.
Accumulated dust can cause mechan- ical failure.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
This may cause damage to the Projector or cause an electric shock hazard !
| Others | WARNING |
|
|
|
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
| Others | NOTES |
|
|
|
Be sure to unplug if the projector | Refer lamp servicing to qualified |
is not to be used for a long peri- | service personnel. |
od. |
|
Accumulated dust may cause a fire hazard!
Only use the specified type of battery.
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
This may cause the batteries to over- heat and leak.
6