LG Electronics BX220-JD Connection, Connecting to a Desktop PC, Connecting to a Notebook PC

Page 17

Connection

Connecting to a Desktop PC

*You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output.

*You can use ARC function for the RGB signals of the Aspect Ration 4:3. (For HD wide input signals, you cannot use ARC function.)

*Fundamentally, HD wide input signal is not included in the Spec, so the set may not support HD signal perfectly.

*Refer to page 31 for the supported pc graphic card displays of the projector.

< How to connect >

a. Connect computer cable to RGB Input (PC/DTV) of the projector.

b. If the PC has DVI output, connect DVI cable to DVI Input of the projector.

Connection

ENGLISH

Connecting to a Notebook PC

< How to connect >

a. Connect computer cable to RGB Input (PC/DTV) of the projector.

*If you set your computer, such as a notebook type IBM PC/AT compatible, to output the signal to both the display of your computer and the external monitor, the picture of the external monitor may not appear properly. In such cases, set the output mode of your computer to output the signal only to the external monitor. For details, refer to the operating instructions supplied with your computer.

b.If the PC has DVI output, connect DVI cable to DVI Input of the projector.

17

Image 17

Contents BX220-JD Class a digital device DLP ProjectorContents Safety Instructions Prevent dust collecting on the power plug pins or outlet Never touch the power plug with a wet handDo not use too many plugs on the Mains multi-outlet Do not allow any objects to fall into the projectorIs not to be used for a long peri Service personnel Do not use water while cleaning the projectorOnly use the specified type of battery Do not drop the projector or allow impact shockMain Body Connecting PartNames of parts Control Panel Installing Batteries Remote ControlProjector Status Indicators Optional Extras AccessoriesInstallation Instructions Installation and CompositionDon’t place the projector where it can be covered with dust Provide proper ventilation for this projectorProjection distance based on the picture format Basic Operation of the ProjectorUsing Kensington Security System Turning off the Projector Turning on the ProjectorFocus and Position of the Screen Image Selecting source modeZoom ring Focus ring Each press of the F, G button changes the display as belowConnecting to a Notebook PC Connecting to a Desktop PCConnection Connect computer cable to RGB Input PC/DTV of the projectorConnecting to a DVD Connecting to a Video SourceConnecting to a D-TV Set-Top Box RGB Input PC/DTV of the projectorFunction Adjusting VideoAPC Auto Picture Control FunctionGamma Function Auto Color Temperature ControlWhite Peaking Function Flip Vertical Function Selecting languageFlip Horizontal Function Auto Source Function Using ARC FunctionUsing Keystone function Selecting Blank Image color Using Blank functionLamp Mode Function Moving Image Still Image Using Still functionChecking lamp time Screen Position Clock / Phase FunctionAuto Tracking Function RS-232C How to connect external control equipmentCommunication Parameter Setup Communication Protocol Command Reference ListInput Select Command2b Power Command2aAspect Ratio Command2c Screen Mute Command2dColor Command2i Brightness Command2hTint Command2j Sharpness Command2kLow Power Command2q Red ADC gain Adjustment Color R Command2wGreen ADC gain Adjustment Color G Command2y Blue ADC gain Adjustment Color B Command2zDVD/DTV Input Supported Monitor DisplayInformation Cleaning the lens MaintenanceMemo Memo BX220-JD SpecificationsOperating Condition Projector Lamp