LG Electronics BX220-JD owner manual Command Reference List, Communication Protocol

Page 27

RS-232C

ENGLISH

Command Reference List

		Command1	Command2	Data
		Command1	Command2	(Hexadecimal)
				(Hexadecimal)

01.	Power	k	a	0 ~ 1
02.	Input Select	k	b	*
03.	Aspect Ratio	k	c	1 ~ 2
04.	Screen Mute	k	d	0 ~ 1
05.	Contrast	k	g	0 ~ 64
06.	Brightness	k	h	0 ~ 64
07.	Color	k	i	0 ~ 64
08.	Tint	k	j	0 ~ 64

09.	Sharpness	k	k	0 ~ 64
10.	OSD Select	k	l	0 ~ 1
11.	Remote Control Lock / Key Lock	k	m	0 ~ 1

12.	Color Temperature	k	u	0 ~ 2

13.	Red ADC gain adjustment	j	w	0 ~ 64
14.	Green ADC gain adjustment	j	y	0 ~ 64

15.	Blue ADC gain adjustment	j	z	0 ~ 64

16.	Low Power	j	q	0 ~ 1
17.	Auto configuration	j	u	1

18.	Input Select	x	b	*

*This data will be explained in this document in detail.

❑Communication Protocol

1.Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

*[Command 1] : First command to control the set.(k, j, x, ASCII code, 1 Character)

*[Command 2] : Second command to control the set..(ASCII code, 1 Character)

*	[Set ID]	: You can adjust the set ID to choose desired projector ID number in special menu. See previous page.
			Adjustment range is 1 ~ 99. When selecting Set ID ‘0’, every connected projector set is controlled.
*	[DATA]	: To transmit command data. Transmit 2 character when organized ASCII code.
			* Transmit ‘FF’ data to read status of command.
*	[Cr]	:	Carriage Return
			ASCII code ‘0x0D’
*	[ ]	:	ASCII code character correspond to “Space Bar” which is in order to classify command, set ID and Data.

2. OK Acknowledgement

[Command2] [ ] [Set ID] [ ] [OK] [Data] [x]

*The Projector transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

3. Error Acknowledgement

[Command2] [ ] [Set ID] [ ] [NG] [Data] [x]

*The Projector transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

Data : [1] : illegal code(This command is not supported.)

[2]: not support function(This function doesn’t work.)

[3]: wait more time(Try again a few minute later.)

27

Image 27

Contents BX220-JD Class a digital device DLP ProjectorContents Safety Instructions Do not allow any objects to fall into the projector Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not use too many plugs on the Mains multi-outletDo not drop the projector or allow impact shock Do not use water while cleaning the projectorIs not to be used for a long peri Service personnel Only use the specified type of batteryConnecting Part Names of partsMain Body Control Panel Installing Batteries Remote ControlProjector Status Indicators Optional Extras AccessoriesProvide proper ventilation for this projector Installation and CompositionInstallation Instructions Don’t place the projector where it can be covered with dustProjection distance based on the picture format Basic Operation of the ProjectorUsing Kensington Security System Turning off the Projector Turning on the ProjectorEach press of the F, G button changes the display as below Selecting source modeFocus and Position of the Screen Image Zoom ring Focus ringConnect computer cable to RGB Input PC/DTV of the projector Connecting to a Desktop PCConnecting to a Notebook PC ConnectionRGB Input PC/DTV of the projector Connecting to a Video SourceConnecting to a DVD Connecting to a D-TV Set-Top BoxFunction Adjusting VideoFunction APC Auto Picture ControlAuto Color Temperature Control White Peaking FunctionGamma Function Selecting language Flip Horizontal FunctionFlip Vertical Function Using ARC Function Using Keystone functionAuto Source Function Using Blank function Lamp Mode FunctionSelecting Blank Image color Using Still function Checking lamp timeMoving Image Still Image Clock / Phase Function Auto Tracking FunctionScreen Position How to connect external control equipment Communication Parameter SetupRS-232C Communication Protocol Command Reference ListScreen Mute Command2d Power Command2aInput Select Command2b Aspect Ratio Command2cSharpness Command2k Brightness Command2hColor Command2i Tint Command2jBlue ADC gain Adjustment Color B Command2z Red ADC gain Adjustment Color R Command2wLow Power Command2q Green ADC gain Adjustment Color G Command2ySupported Monitor Display InformationDVD/DTV Input Cleaning the lens MaintenanceMemo Memo Projector Lamp SpecificationsBX220-JD Operating Condition