LG Electronics BX220-JD owner manual Specifications, Operating Condition, Projector Lamp

Page 35

Information

Specifications

MODEL	BX220-JD

resolution	1024(Horizontal) x 768(Vertical)pixel
horizontal / vertical ratio	4:3(horizontal:vertical)
DLP panel size	0.55 inches
screen size	1.01~5.08m(40~200 inches)
remote control distance	12m
zoom ratio	1:1.2
Video compatibility	NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
Power	AC 100 - 240V~50/60Hz, 3A-1A, 260W
height(mm/inches)	100.7/3.9
breadth(mm/inches)	330/12.9
length(mm/inches)	220.1/8.7

Operating Condition

temperature

In operation : 32~104°F(0°C~40°C)

In storage and transit : -4~140°F(-20°C~60°C)

Projector Lamp

lamp model

AJ-LT91

humidity

In operation : 0~ 80% relative humidity by dry hygrometer

Not in operation : 0 ~ 90% relative humidity by dry hygrometer

lamp power consumption

200W

LAMP Replacement

WARNING : Lamp is no user replaceable part. Do not touch and open the lamp replace cover of bottom enclosure. It could cause injury and electric shock due to high temperature and voltage.

Only service personnel can replace lamp after minimum 3 min. from disconnect mains plug to avoid injury cause by high temperature of lamp.

*Applicable Lamp: Manufactured by USHIO Inc., type NSH200LG

35

Image 35

Contents BX220-JD Class a digital device DLP ProjectorContents Safety Instructions Do not allow any objects to fall into the projector Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not use too many plugs on the Mains multi-outletDo not drop the projector or allow impact shock Do not use water while cleaning the projectorIs not to be used for a long peri Service personnel Only use the specified type of batteryMain Body Connecting PartNames of parts Control Panel Installing Batteries Remote ControlProjector Status Indicators Optional Extras AccessoriesProvide proper ventilation for this projector Installation and CompositionInstallation Instructions Don’t place the projector where it can be covered with dustProjection distance based on the picture format Basic Operation of the ProjectorUsing Kensington Security System Turning off the Projector Turning on the ProjectorEach press of the F, G button changes the display as below Selecting source modeFocus and Position of the Screen Image Zoom ring Focus ringConnect computer cable to RGB Input PC/DTV of the projector Connecting to a Desktop PCConnecting to a Notebook PC ConnectionRGB Input PC/DTV of the projector Connecting to a Video SourceConnecting to a DVD Connecting to a D-TV Set-Top BoxFunction Adjusting VideoFunction APC Auto Picture ControlGamma Function Auto Color Temperature ControlWhite Peaking Function Flip Vertical Function Selecting languageFlip Horizontal Function Auto Source Function Using ARC FunctionUsing Keystone function Selecting Blank Image color Using Blank functionLamp Mode Function Moving Image Still Image Using Still functionChecking lamp time Screen Position Clock / Phase FunctionAuto Tracking Function RS-232C How to connect external control equipmentCommunication Parameter Setup Communication Protocol Command Reference ListScreen Mute Command2d Power Command2aInput Select Command2b Aspect Ratio Command2cSharpness Command2k Brightness Command2hColor Command2i Tint Command2jBlue ADC gain Adjustment Color B Command2z Red ADC gain Adjustment Color R Command2wLow Power Command2q Green ADC gain Adjustment Color G Command2yDVD/DTV Input Supported Monitor DisplayInformation Cleaning the lens MaintenanceMemo Memo Projector Lamp SpecificationsBX220-JD Operating Condition