Mitsubishi Electronics XL650U user manual Wall screen, EN-11, Front projection, ceiling mounting

Page 11

Front projection, ceiling mounting

For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installa- tion. For details, consult your dealer.

The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

When using the projector mounted on the ceiling, set IMAGE REVERSE in the INSTALLATION menu to MIRROR INVERT. See page 24.

When the projector is mounted on the ceiling, im- ages may appear darker than those projected in the case of tabletop mounting. This isn’t a product malfunction.

Ask your installation specialist to provide a breaker. When you do not use the projector, be sure to shut down the main power by the breaker.

Do not install the projector where the exhaust vents are exposed to air emitted by an air conditioning. Such installation may cause a breakdown.

Do not install the projector near a fire alarm because it emits hot air from its exhaust vents.

Rear projection

Ask a specialist for installation. For details, consult your dealer.

For rear projection, set IMAGE REVERSE in the IN- STALLATION menu to MIRROR. See page 24.

Caution:

Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the projector to facilitate ventilation.

Place the projector at least 50 cm (or 20 inches) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.

Do not use the projector in the following locations and manners, which may cause fire or electric shock.

In a dusty or humid place.

In a sideways or upside-down position.

Near a heater.

In an oily, smoky, or damp place such as a kitchen.

In direct sunlight.

Where the temperature rises high, such as in a closed car.

Where the temperature is lower than +41ºF (or +5ºC) or higher than +95ºF (or +35ºC ).

Important:

We don’t recommend using the projector at an alti- tude of 1500 meters or higher. Use at an altitude of 1500 meters or higher may affect the projector’s life.

Wall screen

This function is to reproduce natural color tone when images are projected directly onto a wall. You can se- lect from BEIGE, LIGHT BLUE, LIGHT GREEN, PINK, BLACK BOARD and OFF depending on the wall to be used.

1.Display the INSTALLATION menu. (See page 23 for menu setting.)

opt.

INSTALLATION

WALL SCREEN

BEIGE

 

 

 

 

 

 

LAMP MODE

STANDARD

2.Press the ￿ or ￿ button to select WALL SCREEN.

3.Press the ￿ or ￿ button to select the color closest to that of the screen on which images are project- ed.

When projecting images on a screen or white wall, select OFF.

When OFF or BLACK BOARD is selected, adjustment of the color density is unavailable.

4.Press the ENTER button.

LIGHT BLUE

1

5. Press the ￿ or ￿ button to adjust the color density.

As an alternative method for selecting WALL SCREEN, press the WALL SCREEN button on the remote control.

ENGLISH

EN-11

Image 11
Contents XL650 XL550 EN-2 When using the projector in EuropeContents EN-4 Important safeguardsPlace of installation Do not keep using the damaged projectorDo not look into the lens when it is operating Do not unplug the power cord during op- erationPreparing your projector Checking accessoriesInserting the batteries into the remote control EN-7 OverviewControl area Terminal boardEN-8 Remote controlPreparating your projector Bottom sideEN-9 Using the remote controlOperational range of the remote control Reception angleAdjusting the projection angle Setting up your projectorSetting up the screen Basic setupRear projection Wall screenEN-11 Front projection, ceiling mountingEN-12 Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceEN-13 Connecting the projector to a computerViewing computer images About DDC Plugging the power cordViewing computer images EN-14EN-15 Projecting imagesAuto Position button When connecting to a notebook computerTo stop projecting AV muteViewing video images Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connectedProjector + DVD player or Hdtv decoder Plugging in the power cordConnecting To video equipment having a DVI-D terminal Viewing video imagesEN-19 Projecting imagesEN-20 Volume from the speakerEN-21 Setting the aspect ratioHow to change the settings When projected images are distorted to a trapezoidEN-22 Menu operationEN-23 How to set the menusAvailable settings in the menus EN-24 EN-25 EN-26 Menu operationTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureLPF Progressive filter To adjust the vertical positionEN-29 XL650U Advanced featuresSetting of the image displayed during startup or muting EN-30EN-31 Password functionTo enable the password function To cancel the password functionPicture in Picture PinP Advanced featuresEN-32 ExpandOperation Mouse remote controlEN-33 Connection Supervising and controlling by computerEN-34 Major functionsEN-35 IndicatorsNormal condition Abnormal conditionEN-36 Interval of lamp replacementReplacing the lamp EN-37 Reset of the lamp operation timeWhen removing the lamp from the ceiling-mounted projector To replace the lampCleaning of the lens MaintenanceCleaning of the air-filter Cleaning of the projector and the ventilation slotsEN-39 TroubleshootingNo image appears on the screen Problem Solution Images are not displayed correctly TroubleshootingProblem Solution EN-40Kensington Lock Images are not displayed correctly Problem SolutionOthers Problem Solution EN-41EN-42 Replacement part Option/Not included in the boxSpecifications XGA85 EN-43COMPUTER/COMPONENT Video IN-1/IN-2 DVI-D Hdcp ConnectorsEN-44 Mitsubishi Projector Contact Information