Mitsubishi Electronics XL650U Preparating your projector, Bottom side, Remote control, EN-8

Preparating your projector (continued)

Bottom side

1	1	Adjustment foot (for vertical position)
	2	Adjustment foot (for horizontal position)

2

Remote control

1
2
3
4				27
5		1	2
		COMPUTER
6	DVI-D(HDCP)	VIDEO	S-VIDEO	26
7	HOME	PageUP	AUTO POSITION	25
	END	PageDOWN	LASER
8				24
				23
9				22
10				21
11	MENU	R-CLICK	ENTER	20
			KEYSTONE	19
	VOLUME		ASPECT	18
12	WALL SCREEN EXPAND		PinP	17
13	CE	MUTE	STILL	16
				15
				14

28

About the laser beam

1Laser aperture

2Transmission window

3Indicator

4POWER button

5VIDEO button

6DVI-D (HDCP) button

7HOME button

8END button

9Mouse pointer

10MENU button

11+ , - (VOLUME) buttons

12WALL SCREEN button

13CE (Color Enhancer) button

14MUTE button (Audio/Video)

15EXPAND button

16STILL button

17PinP button

18ASPECT button

19KEYSTONE button

20ENTER button

21R-CLICK button

22Direction buttons

23LASER button

24AUTO POSITION button

25Page UP and PageDOWN buttons

26S-VIDEO button

27COMPUTER 1, 2 buttons

28L-CLICK button

•The + and - buttons are used in the KEYSTONE adjustment and the EXPAND mode in addition to the volume control.

•The direction buttons are used for the keystone adjustment and fine adjustment (￿ and ￿ buttons only).

•Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER but- ton, it is emitted only one minute. To keep emitting it longer, press the LASER button again.

•You can disable the LASER button to prevent laser radiation due to misuse of the button.

How to disable the LASER button

While holding the LASER button down, press the ￿ button 3 times.

How to enable the LASER button

While holding the LASER button down, press the ￿ button 3 times.

•Whenever the batteries are replaced, the LASER button is enabled.

This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)

Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)

Caution:

•Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.

•Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

•This remote controller cannot be repaired.

EN-8