Mitsubishi Electronics XL650U Advanced features, EN-32, Expand, Picture in Picture PinP, Still

Page 32

Advanced features (continued)

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details.

The EXPAND mode doesn’t function with some input signals. For details, see page 43.

The EXPAND mode doesn’t work with video or S-video signal.

EXPAND

Magnified image

To use the EXPAND mode:

1.Press the EXPAND button.

You can select the area to be magnified by pressing the ￿, ￿, ￿, or ￿ button on the remote control.

You can change the magnification of the selected area by pressing the + or - button.

2.Press the EXPAND button again to exit the EXPAND mode.

The regular operation screen will appear.

Important:

• In the EXPAND mode, you can’t adjust the volume.

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

To use the PinP mode

1.Press the PinP button on the remote control.

When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN-1/IN-2 terminal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn’t activated.

When the component video signal is inputted, the PinP mode isn’t activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

The PinP mode will be canceled.

To change the position of the sub image:

Press the ￿ or ￿ buttons on the remote control.

When there is no video signal for sub image, you can’t change the display position.

Important:

The motion may not run smoothly in the PinP mode.

The PinP mode isn’t available with some input signals. For further information, see page 43.

When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

The PinP mode is available only when the ASPECT ratio is set to AUTO.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

Do not display a still picture for a long time because the afterimages may persist on the screen.

EN-32

Image 32
Contents XL650 XL550 When using the projector in Europe EN-2Contents Important safeguards EN-4Do not keep using the damaged projector Do not look into the lens when it is operatingDo not unplug the power cord during op- eration Place of installationPreparing your projector Checking accessoriesInserting the batteries into the remote control Overview Control areaTerminal board EN-7Remote control Preparating your projectorBottom side EN-8Using the remote control Operational range of the remote controlReception angle EN-9Setting up your projector Setting up the screenBasic setup Adjusting the projection angleWall screen EN-11Front projection, ceiling mounting Rear projectionSetting up your projector When the aspect ratio of the screen isScreen size and projection distance EN-12EN-13 Connecting the projector to a computerViewing computer images Plugging the power cord Viewing computer imagesEN-14 About DDCProjecting images EN-15When connecting to a notebook computer To stop projectingAV mute Auto Position buttonConnecting the projector to video equipment Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesPlugging in the power cord Connecting To video equipment having a DVI-D terminalViewing video images Projector + DVD player or Hdtv decoderProjecting images EN-19Volume from the speaker EN-20Setting the aspect ratio How to change the settingsWhen projected images are distorted to a trapezoid EN-21Menu operation EN-22EN-23 How to set the menusAvailable settings in the menus EN-24 EN-25 Menu operation EN-26Adjusting projected images To adjust the brightness Contrast and BrightnessTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessAdjusting projected images To adjust the tone of white Color TempAbout color temperature Color EnhancerLPF Progressive filter To adjust the vertical positionEN-29 Advanced features Setting of the image displayed during startup or mutingEN-30 XL650UPassword function To enable the password functionTo cancel the password function EN-31Advanced features EN-32Expand Picture in Picture PinPOperation Mouse remote controlEN-33 Supervising and controlling by computer EN-34Major functions ConnectionIndicators Normal conditionAbnormal condition EN-35EN-36 Interval of lamp replacementReplacing the lamp Reset of the lamp operation time When removing the lamp from the ceiling-mounted projectorTo replace the lamp EN-37Maintenance Cleaning of the air-filterCleaning of the projector and the ventilation slots Cleaning of the lensEN-39 TroubleshootingNo image appears on the screen Problem Solution Troubleshooting Problem SolutionEN-40 Images are not displayed correctlyImages are not displayed correctly Problem Solution Others Problem SolutionEN-41 Kensington LockEN-42 Replacement part Option/Not included in the boxSpecifications EN-43 XGA85COMPUTER/COMPONENT Video IN-1/IN-2 DVI-D Hdcp ConnectorsEN-44 Mitsubishi Projector Contact Information