Mitsubishi Electronics XL7000U Adjustment using the Keystone mode, Keystone → Reset → Keystone

Page 14

Setting up your projector (continued)

Adjustment using the KEYSTONE mode:

When the screen and the projector are not placed perpendicularly to each other, projected images become trapezoidal. If you cannot place them perpendicularly to each other, press the ENTER/ GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the KEYSTONE mode and then press the , , or

button to correct the distortion.

KEYSTONE

:

0

:

0

KEYSTONE

 

SELECT : BLANK

Every time you press the BLANK button, the adjustment menu changes as follows:

KEYSTONE → RESET → KEYSTONE ...

KEYSTONE menu

You can correct the distortion vertically or horizontally focusing on the screen center.

In the following cases (for front projection):

t 8IFOUIF,&:450/&NPEFBEKVTUNFOUUBLFT effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

t 8IFOUIF,&:450/&NPEFBEKVTUNFOUJT performed, the displayed image may be distorted.

t %FQFOEJOHPOUIFJOTUBMMBUJPODPOEJUJPOTPGUIF projector and the screen, a perfect rectangular image and the proper aspect ratio may not be obtained. Slight distortion can be corrected by the CORNERSTONE-mode adjustment.

t /PJTFNBZBQQFBSPOUIFTDSFFOEVSJOHUIF KEYSTONE-mode adjustment because of the type of the video signal being projected and the setting values of the KEYSTONE-mode adjustment. In such cases, set the KEYSTONE-mode adjustment values in the range where the image is displayed without noise.

t 8IFOZPVDBSSZPVUUIF,&:450/&NPEF adjustment and the CURVED-mode adjustment in combination, the adjustment range becomes narrower than that in the case where you carry out these adjustments individually. When setting the KEYSTONE-mode adjustment value to 11 or larger, you cannot use the CURVED-mode adjustment.

t 8IFODBSSZJOHPVUUIF,&:450/&NPEF adjustment while the option lens is in use, you may not be able to obtain a perfectly rectangular image or the correct aspect ratio. Slight distortion can be corrected by the CORNERSTONE-mode adjustment.

Press the button.

Press the button.

Press the button.

Press the button.

Adjustment using the CORNERSTONE mode:

Use this adjustment for fine adjustment of the image shape. For adjustment, press the ENTER/GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the CORNERSTONE mode and then press the , , or button.

When you press the or button in the RESET mode, the distortion correction is reset.

Important:

t 5IFCFTUBEKVTUNFOUSFTVMUDBOCFPCUBJOFEXIFO the lens is positioned at the center of the lateral direction at the top in the longitudinal direction (when the projector is installed on the floor, or

at the bottom when it is installed on the ceiling). Before performing the keystone adjustment, reset the lens position to the default position by using LENS SHIFT RESET (see page 33) and then move it to the top using LENS SHIFT (see page 12).

t 8IFOUIF,&:450/&NPEFBEKVTUNFOUJTDBSSJFE out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.

CORNERSTONE

:

0

:

0

LOWER RIGHT

 

SELECT : BLANK

Every time you press the BLANK button, the adjustment menu changes as follows:

LOWER RIGHT → LOWER LEFT → UPPER RIGHT →

UPPER LEFT → RESET → LOWER RIGHT ...

EN-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Do not keep using the damaged projectorRemoving the batteries from the remote control Checking accessoriesInserting the batteries into the remote control Preparing your projectorControl area Preparing your projectorOverview Bottom side IndicatorsRemote control Using the wired remote control Using the remote controlOperational range of the remote control Reception angleSetting by the remote control alone Using the remote controlSetting the ID number of the remote control Setting by using the projectorSetting up the screen Setting up your projectorBefore setting up Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorSetup adjustment Changing the Auto Power OFF settingWhen fine streaks are seen on projected images Setting High Altitude ModeSetting Image Reverse When the projected image is distortedKeystone → Reset → Keystone Adjustment using the Keystone modeAdjustment using the Cornerstone mode Keystone menuARC menu Adjustment using the Curved modeLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu HORIZ. Origin or VERT. Origin menuAdjusting the origin to the vertical arc Be corrected by the CORNERSTONE-mode adjustment *OBEVTUZPSIVNJEQMBDF Front projection, ceiling mountingRear projection  /FBSBIFBUFSConnecting the projector to a computer Viewing computer imagesAbout DDC Plugging the power cordViewing computer images For monitor connectionInstalling the terminal cover  3FNPWFUIFMFOTDBQ Confirm the Power indicator lights up redProjecting images Select an input source $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Direct Power OFFTo stop projecting Example of the setting procedure for external output When connecting to a notebook computerSetting of the resolution Blanking the screen temporarily BlankWhen a TV tuner or VCR is connected Connecting the projector to video equipmentConnecting to a video player, etc Viewing video imagesViewing video images Projector + DVD player or Hdtv decoderPlugging in the power cord Connection for video equipment having a DVI-D terminalEN-27 Volume from the speaker Setting the aspect ratioHow to change the settings With the remote control With the Feature menu See page 31 for menu settingMenu operation Image menu Installation menu Feature menuSignal menu Network menu Information menu Menu operation How to set the menusPress the  or  button to select an item to adjust Press the  or  button to select a menu to useEnhanced Image menuAuto SeeAuto Power on On / OFF Setting Function Lamp Mode StandardStandby Mode Standard Auto Power OFFHigh Altitude Mode Standard Menu Access Splash ID Screen Menu PositionCinema Mode Auto Aspect NormalSetup Auto Setting Function Advanced Menu EnterVideo Signal Auto / Ntsc / PAL / Secam Reset ALLSignal menu IP Config Enter Setting Function Projector NameNetwork Password Enter Default GatewayLamp Time LOW ResolutionDescription Serial NumberTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempColor Enhancer Adjusting projected imagesAbout color temperature Select an item you want to set using  or  button Adjusting the fineness of the image Super ResolutionAdjusting the tone of each color NCM Select NCM by pressing the  or  buttonHow to adjust the computer image YESTo adjust the vertical position Simple method to adjust the image positionTo adjust the horizontal position LPF Progressive filterNetwork Password Settings Initial network settingsSetting Projector Name Enabling or disabling the network certificationSetting or Clearing Dhcp Initial network settingsIP Settings IP Address SettingsDefault Gateway Settings Setting the control systemSubnet Mask Settings Saving IP Config SettingsGlossary Initialization of Network SettingsHow to Use Network Function DhcpChanging the image displayed at the startup Advanced featuresSetting procedure To enable the password function Advanced featuresPassword function To cancel the password functionFreeze Picture in Picture PinPMagnifying the displayed image Major functions PJLink supported commands ConnectionInterval of lamp replacement Replacing the lampTo replace the lamp Reset of the lamp operation timeReplacing the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Cleaning of the filterMounting the lens option lens Replacing the lensRemoving the lens Troubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly TroubleshootingProblem Solution $IFDLUIBUUIFWPMVNFJTOUTFUUPMPX Images are not displayed correctly Problem SolutionOthers Problem Solution 3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF FOCUS/ZOOMJUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF Power Status Filter Condition Possible Solution IndicatorsPower Status Filter Condition Replacement part option/not included in the box SpecificationsSpecifications XGA85Composite Sync ConnectorsDimension drawings unit mm Hdmi SerialWith long throw zoom lens OL-XL7100LZ Specification of the attached lensWith short throw zoom lens OL-XL7100SZ With tele throw zoom lens OL-XL7100TZWith rear projection short throw OL-XL7100FR ProjectionMitsubishi Electric Corporation
Top Page Image Contents