Mitsubishi Electronics XL7000U Projecting images,  3FNPWFUIFMFOTDBQ, Select an input source

Page 21

Viewing computer images (continued)

D. Projecting images

Preparation:

t 3FNPWFUIFMFOTDBQ

POWER button

POWER button

 

(ON/STANDBY)

 

(ON/STANDBY)

 

COMPUTER 1, 2 buttons

 

 

 

, , , buttons

 

DVI-D(HDCP)

POWER indicator

 

 

button

STATUS indicator

 

 

ENTER button

COMPUTER/DVI-D button

, , , buttons

ENTER button

LENS SHIFT button

 

 

 

ZOOM/FOCUS button

ZOOM/FOCUS button

 

 

 

LENS SHIFT button

 

 

1.Confirm the POWER indicator lights up red.

t *GUIFQSPKFDUPSXBTUVSOFEPGGCFGPSFUIFMBNQXBTDPPMFEEPXOTVGmDJFOUMZMBTUUJNFUIFGBONBZTUBSUSPUBUJOH and the POWER button may not work after the power cord is plugged. (The STATUS indicator blinks green.) After the fan stops rotating, press the POWER button to turn back on the POWER indicator.

2.Turn on the power of the connected computer.

3.Press the POWER button.

t *UNBZUBLFBCPVUNJOVUFGPSUIFMBNQUPMJHIUVQ

t 5IFMBNQGBJMTUPMJHIUVQPOSBSFPDDBTJPOT*OTVDIBDBTFXBJUGPSBGFXNJOVUFTBOEUIFOUSZBHBJO t %POPUDPWFSUIFMFOTXJUIUIFMFOTDBQXIJMFUIFMBNQJTPO

t "GUFSUIF108&3CVUUPOJTQSFTTFEUIFJNBHFNBZnJDLFSCFGPSFUIFMBNQCFDPNFTTUBCMF5IJTJTOPUB product malfunction.

t 3FHBSEMFTTPGUIFTFUUJOHPG-".1.0%&UIF-08MBNQNPEFJTBDUJWBUFECZEFGBVMUXIFOFWFSUIFQSPKFDUPS is turned on. When LAMP MODE has been set to STANDARD, the lamp mode changes from LOW to STANDARD about 2 minutes after turn-on.

t 5IFQSPKFDUPSTUBSUTXBSNJOHVQXIFOUIF108&3CVUUPOJTQSFTTFE%VSJOHUIFXBSNVQQSPDFTTJNBHFT may appear dark and no commands are accepted.

t #ZCMJOLJOHSFEUIF45"564JOEJDBUPSJOEJDBUFTUIBUUIFMBNQTIPVMECFSFQMBDFETPPO3FQMBDFUIFMBNQXIFO the STATUS indicator blinks red. (See page 62.)

4.Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.

5.Adjust with the or button to get a fine picture.

t 8IFOUIF&/5&3CVUUPOJTQSFTTFEXIJMFUIF;00.'0$64NFOVJTEJTQMBZFEUIFBEKVTUNFOUNPEFJT switched between FAST and STEP. When FAST is selected, the speed of focus controlled by the or button becomes fast, and it becomes slow when STEP is selected.

6.Select an input source.

t 1SFTTUIF$0.165&3%7*%CVUUPOPOUIFQSPKFDUPSPSUIF$0.165&3$0.165&3PS%7*% )%$1  button on the remote control that is corresponding to the terminal in use.

t 5IFJOQVUTPVSDFJTTXJUDIFEGSPN$0.165&3UP$0.165&3UP%7*BUFWFSZQSFTTPGUIF$0.165&3

DVI-D button on the projector.

t 5IFQSPKFDUPSBVUPNBUJDBMMZTFMFDUTUIFBQQSPQSJBUFTJHOBMGPSNBU5IFTFMFDUFETJHOBMGPSNBUJTEJTQMBZFEPO the screen.

t :PVDBOOPUDIBOHFUIFJOQVUTPVSDFXIJMFUIFNFOVJTCFJOHEJTQMBZFE

t 5IPVHIJUNBZUBLFTPNFUJNFCFGPSFBOJNBHFJTEJTQMBZFEPOUIFTDSFFOEFQFOEJOHPOUIFUZQFPGUIFJOQVU signal, such symptom is not a malfunction.

t *NBHFTNBZOPUCFQSPKFDUFEJOUIFDPSSFDUQPTJUJPOEFQFOEJOHPOUIFUZQFPGUIFJOQVUTJHOBM*OTVDIBDBTF press the AUTO POSITION button. (See page 23.)

t 8IFO$0.165&3PS$0.165&3JTDIPTFOBTUIFTPVSDFJNBHFTTVQQMJFEGSPNUIFDPNQVUFSNBZ

flicker. Press the or button on the remote control to reduce flicker, if it occurs. (Fine adjustment)

7.Adjust the position of the projector to keep an appropriate projection distance with which images are projected in their specified sizes.

8.Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page 11.) t When the projector cannot be positioned perpendicularly to the screen, adjust the projection angle. (See page 13.)

EN-21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Do not keep using the damaged projector Important safeguardsInserting the batteries into the remote control Checking accessoriesRemoving the batteries from the remote control Preparing your projectorPreparing your projector OverviewControl area Indicators Remote controlBottom side Operational range of the remote control Using the remote controlUsing the wired remote control Reception angleSetting the ID number of the remote control Using the remote controlSetting by the remote control alone Setting by using the projectorBefore setting up Setting up your projectorSetting up the screen Screen size and projection distanceSetup adjustment Setting up your projectorAdjusting the position of the projected image Changing the Auto Power OFF settingSetting Image Reverse Setting High Altitude ModeWhen fine streaks are seen on projected images When the projected image is distortedAdjustment using the Cornerstone mode Adjustment using the Keystone modeKeystone → Reset → Keystone Keystone menuLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu Adjustment using the Curved modeARC menu HORIZ. Origin or VERT. Origin menuBe corrected by the CORNERSTONE-mode adjustment Adjusting the origin to the vertical arcRear projection Front projection, ceiling mounting *OBEVTUZPSIVNJEQMBDF  /FBSBIFBUFSViewing computer images Connecting the projector to a computerViewing computer images Plugging the power cordAbout DDC For monitor connectionInstalling the terminal cover Projecting images Confirm the Power indicator lights up red 3FNPWFUIFMFOTDBQ Select an input sourceDirect Power OFF To stop projecting $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Setting of the resolution When connecting to a notebook computerExample of the setting procedure for external output Blanking the screen temporarily BlankConnecting to a video player, etc Connecting the projector to video equipmentWhen a TV tuner or VCR is connected Viewing video imagesProjector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having a DVI-D terminal Plugging in the power cordEN-27 Setting the aspect ratio Volume from the speakerWith the Feature menu See page 31 for menu setting How to change the settings With the remote controlImage menu Installation menu Feature menu Signal menu Network menu Information menuMenu operation Press the  or  button to select an item to adjust How to set the menusMenu operation Press the  or  button to select a menu to useAuto Image menuEnhanced SeeStandby Mode Standard Setting Function Lamp Mode StandardAuto Power on On / OFF Auto Power OFFCinema Mode Auto Menu Access Splash ID Screen Menu PositionHigh Altitude Mode Standard Aspect NormalVideo Signal Auto / Ntsc / PAL / Secam Setting Function Advanced Menu EnterSetup Auto Reset ALLSignal menu Network Password Enter Setting Function Projector NameIP Config Enter Default GatewayDescription ResolutionLamp Time LOW Serial NumberTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To adjust the tone of white Color TempAdjusting projected images About color temperatureColor Enhancer Adjusting the tone of each color NCM Adjusting the fineness of the image Super ResolutionSelect an item you want to set using  or  button Select NCM by pressing the  or  buttonYES How to adjust the computer imageTo adjust the horizontal position Simple method to adjust the image positionTo adjust the vertical position LPF Progressive filterSetting Projector Name Initial network settingsNetwork Password Settings Enabling or disabling the network certificationIP Settings Initial network settingsSetting or Clearing Dhcp IP Address SettingsSubnet Mask Settings Setting the control systemDefault Gateway Settings Saving IP Config SettingsHow to Use Network Function Initialization of Network SettingsGlossary DhcpAdvanced features Setting procedureChanging the image displayed at the startup Password function Advanced featuresTo enable the password function To cancel the password functionPicture in Picture PinP Magnifying the displayed imageFreeze Major functions Connection PJLink supported commandsReplacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens Cleaning of the filterReplacing the lens Removing the lensMounting the lens option lens No image appears on the screen Problem Solution TroubleshootingTroubleshooting Problem SolutionImages are not displayed correctly Images are not displayed correctly Problem Solution Others Problem Solution$IFDLUIBUUIFWPMVNFJTOUTFUUPMPX FOCUS/ZOOM JUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF Indicators Power Status Filter ConditionPower Status Filter Condition Possible Solution Specifications Replacement part option/not included in the boxXGA85 SpecificationsDimension drawings unit mm ConnectorsComposite Sync Hdmi SerialWith short throw zoom lens OL-XL7100SZ Specification of the attached lensWith long throw zoom lens OL-XL7100LZ With tele throw zoom lens OL-XL7100TZProjection With rear projection short throw OL-XL7100FRMitsubishi Electric Corporation
Top Page Image Contents