Mitsubishi Electronics XL7000U Setting Function Projector Name, Network Certification OFF, Dhcp

Menu operation (continued)

NETWORK menu

opt. opt.

	NETWORK							NETWORK
		PROJECTOR NAME						IP CONFIG
		NETWORK			ON				DHCP	ON
		CERTIFICATION
		NETWORK			ENTER				IP ADDRESS	0. 0. 0. 0
		PASSWORD
		IP CONFIG			ENTER				SUBNET MASK	0. 0. 0. 0
		CONTROL SYSTEM			STANDARD				DEFAULT GATEWAY	0. 0. 0. 0
		NETWORK RESET			OK				MAC ADDRESS
		NETWORK RESTART			OK				SAVE SETTINGS	OK
ITEM			SETTING				FUNCTION
PROJECTOR NAME			*****...				Set the name to identify the projector. Enter up to 15 characters
							(alphabets or numeric characters). (See page 44.)
NETWORK CERTIFICATION			ON	/ OFF			Select whether to enable the network certification or not. Select ON
NETWORK PASSWORD			ENTER				for normal use. (See page 44.)
							Set the password for Web control or PJLink™ certification. (See page
						44.)
IP CONFIG			ENTER				Select this setting for IP Configuration. (See page 45.)
DHCP			ON				Select this setting when you obtain IP CONFIG automatically by
							DHCP server.
			OFF				Select this setting when you set IP CONFIG manually.
IP ADDRESS			***.***.***.***				Press the ENTER button to set IP ADDRESS. When DHCP is set to
							ON, you cannot change this setting.
SUBNET MASK			***.***.***.***				Press the ENTER button to set SUBNET MASK. When DHCP is set to
							ON, you cannot change this setting.
DEFAULT GATEWAY			***.***.***.***				Press the ENTER button to set DEFAULT GATEWAY. When DHCP is
							set to ON, you cannot change this setting.
MAC ADDRESS			xx-xx-xx-xx-xx-xx				Displays MAC ADDRESS.
SAVE SETTINGS			OK				Saves the IP CONFIG settings. When the IP CONFIG is not changed,
							you cannot select SAVE SETTINGS.
CONTROL SYSTEM			STANDARD				Select this setting when using ProjectorView Global+ or ProjectorView.
							(See pages 46 and 51.)
			AMX				Select when using a controller made by AMX. (See pages 46 and 51.)
			CRESTRON				Select this setting when using the controller or software of Crestron
							Electronics, Inc. (See pages 46 and 51.)
NETWORK RESET			OK				Resets the Network Setting. (See page 47.)
NETWORK RESTART			OK				Press the ENTER button to restart the network function.

EN-37