Mitsubishi Electronics XL7000U Advanced features, Changing the image displayed at the startup

Page 48

Advanced features

Changing the image displayed at the startup

You can display your desired image as the startup screen (or splash screen). By setting the menu, you can use such image instead of the background image that is displayed when no video signal is supplied.

Important:

t You can’t set IMAGE CAPTURE when PASSWORD FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.

t You can’t set IMAGE CAPTURE when the component video signal is inputted.

Setting procedure

(See page 31 for menu setting.)

1.Press the COMPUTER button to select the image supplied to the COMPUTER/COMPONENT/VIDEO IN terminal.

2.Display your desired image.

3.Display the INSTALLATION menu.

4.Select IMAGE CAPTURE by pressing the or button.

5.Press the ENTER button.

t The setting menu will be displayed.

opt.

INSTALLATION

CUSTOM IMAGE CAPTURE

BACK COLOR

GRAY

SIZE

x1

CAPTURE

GO

 

 

 

 

Set the background color

(Set the background color only when you set the image size to x1 or x2.)

6.Select BACK COLOR by pressing the or button.

7.Select your desired color for the background (GRAY, RED, GREEN, BLUE, BLACK, WHITE,

3&% (3&&/ PS#-6& CZQSFTTJOH the or button.

Set the image size

8.Select SIZE by pressing the or button.

9.Select x1, x2, or FULL by pressing the or button.

x1

x2

FULL

Capture the image

10.Select CAPTURE by pressing the or button. 11.Press the ENTER button.

t A red frame appears. (The size of the red frame is 320 x 240 pixels.)

t 5IFJNBHFXJUIJOUIFPVUFSFEHFTPGUIFSFE frame is captured.

t 5IFDBQUVSFEJNBHFJTEJTQMBZFEJOUIF3&"- mode automatically.

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

12.Adjust the size of the image to be captured so that such image stays within the red frame.

t Press the , , or button to move the red frame.

t You can’t move the red frame outside the screen.

t Press the MENU button to cancel the procedure.

CAPTURE : ENTER X2

CANCEL : MENU

13.Press the ENTER button twice. t Image capture will start.

CAPTURING IMAGE !

CAPTURE : ENTER X2

CANCEL : MENU

t When the image capture completes, the captured image will be displayed for 1 second.

Important:

t You can’t change the new startup screen back to the original startup screen. (Even when you select RESET ALL in the FEATURE menu, the factory default screen isn’t available any longer.) When you want to change the startup screen again, capture another image.

t The captured image will be displayed from the next startup. If the captured image isn’t displayed, make sure that the setting of SPLASH SCREEN in the INSTALLATION menu isn’t OFF. (See page 33.)

t When BACK COLOR in the INSTALLATION menu is set to IMAGE, the captured image will be displayed while no signal is supplied.

t 8IFOOPWJEFPTJHOBMJTTVQQMJFEUIFQSPKFDUPS takes some time to display the captured image.

t Some images can’t be captured correctly because of their signal type.

EN-48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Do not keep using the damaged projectorChecking accessories Inserting the batteries into the remote controlRemoving the batteries from the remote control Preparing your projectorPreparing your projector OverviewControl area Indicators Remote controlBottom side Using the remote control Operational range of the remote controlUsing the wired remote control Reception angleUsing the remote control Setting the ID number of the remote controlSetting by the remote control alone Setting by using the projectorSetting up your projector Before setting upSetting up the screen Screen size and projection distanceSetting up your projector Setup adjustmentAdjusting the position of the projected image Changing the Auto Power OFF settingSetting High Altitude Mode Setting Image ReverseWhen fine streaks are seen on projected images When the projected image is distortedAdjustment using the Keystone mode Adjustment using the Cornerstone modeKeystone → Reset → Keystone Keystone menuAdjustment using the Curved mode Lower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menuARC menu HORIZ. Origin or VERT. Origin menuAdjusting the origin to the vertical arc Be corrected by the CORNERSTONE-mode adjustmentFront projection, ceiling mounting Rear projection *OBEVTUZPSIVNJEQMBDF  /FBSBIFBUFSConnecting the projector to a computer Viewing computer imagesPlugging the power cord Viewing computer imagesAbout DDC For monitor connectionInstalling the terminal cover Confirm the Power indicator lights up red Projecting images 3FNPWFUIFMFOTDBQ Select an input sourceDirect Power OFF To stop projecting $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU When connecting to a notebook computer Setting of the resolutionExample of the setting procedure for external output Blanking the screen temporarily BlankConnecting the projector to video equipment Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesViewing video images Projector + DVD player or Hdtv decoderPlugging in the power cord Connection for video equipment having a DVI-D terminalEN-27 Volume from the speaker Setting the aspect ratioHow to change the settings With the remote control With the Feature menu See page 31 for menu settingImage menu Installation menu Feature menu Signal menu Network menu Information menuMenu operation How to set the menus Press the  or  button to select an item to adjustMenu operation Press the  or  button to select a menu to useImage menu AutoEnhanced SeeSetting Function Lamp Mode Standard Standby Mode StandardAuto Power on On / OFF Auto Power OFFMenu Access Splash ID Screen Menu Position Cinema Mode AutoHigh Altitude Mode Standard Aspect NormalSetting Function Advanced Menu Enter Video Signal Auto / Ntsc / PAL / SecamSetup Auto Reset ALLSignal menu Setting Function Projector Name Network Password EnterIP Config Enter Default GatewayResolution DescriptionLamp Time LOW Serial NumberAdjusting projected images To adjust the brightness Contrast and BrightnessTo adjust the color Color and Tint To adjust the tone of white Color TempAdjusting projected images About color temperatureColor Enhancer Adjusting the fineness of the image Super Resolution Adjusting the tone of each color NCMSelect an item you want to set using  or  button Select NCM by pressing the  or  buttonHow to adjust the computer image YESSimple method to adjust the image position To adjust the horizontal positionTo adjust the vertical position LPF Progressive filterInitial network settings Setting Projector NameNetwork Password Settings Enabling or disabling the network certificationInitial network settings IP SettingsSetting or Clearing Dhcp IP Address SettingsSetting the control system Subnet Mask SettingsDefault Gateway Settings Saving IP Config SettingsInitialization of Network Settings How to Use Network FunctionGlossary DhcpAdvanced features Setting procedureChanging the image displayed at the startup Advanced features Password functionTo enable the password function To cancel the password functionPicture in Picture PinP Magnifying the displayed imageFreeze Major functions PJLink supported commands ConnectionInterval of lamp replacement Replacing the lampReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Maintenance Cleaning of the projector and the ventilation slotsCleaning of the lens Cleaning of the filterReplacing the lens Removing the lensMounting the lens option lens Troubleshooting No image appears on the screen Problem SolutionTroubleshooting Problem SolutionImages are not displayed correctly Images are not displayed correctly Problem Solution Others Problem Solution$IFDLUIBUUIFWPMVNFJTOUTFUUPMPX FOCUS/ZOOM JUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF Indicators Power Status Filter ConditionPower Status Filter Condition Possible Solution Replacement part option/not included in the box SpecificationsSpecifications XGA85Connectors Dimension drawings unit mmComposite Sync Hdmi SerialSpecification of the attached lens With short throw zoom lens OL-XL7100SZWith long throw zoom lens OL-XL7100LZ With tele throw zoom lens OL-XL7100TZWith rear projection short throw OL-XL7100FR ProjectionMitsubishi Electric Corporation
Top Page Image Contents