Mitsubishi Electronics XL7000U Aspect Normal, Full, Projector ID ALL, Display Input, Film, Video

Page 34

Menu operation (continued)

FEATURE menu

opt.

opt.

FEATURE

FEATURE

	ASPECT	NORMAL	ADVANCED MENU
	PROJECTOR ID	ALL	VIDEO SIGNAL	AUTO
	PASSWORD FUNCTION	DISPLAY INPUT	SETUP	AUTO
	MENU POSITION	1.	SCART INPUT	OFF
	CINEMA MODE	AUTO	LAMP WARNING	STANDARD
A Ë	LANGUAGE	English	HIDE OSD	OFF

HIGH ALTITUDE MODE	STANDARD

ADVANCED MENU

ENTER

RESET ALL

OK

ITEM

SETTING

FUNCTION

ASPECT

NORMAL

Select to change the aspect ratio automatically depending on the

input signal. (Select this option for normal use.)

16:9

Select to expand squeezed (or horizontally compressed) images

such as DVD images to 16:9. Press the ENTER button to make

further settings such as positioning of the displayed image and

selection of signals expanded by this function. (See page 29.)

FULL

Select to project images in full size (1024 x 768 pixels) irrespective

of type of input signal.

PROJECTOR ID

ALL

Select this option to control the projector regardless of the ID

number. (See page 10.)

01 to 63

/

Use to set the ID number (two-digit number). (See page 10.)

PASSWORD FUNCTION

DISPLAY INPUT

Use to enable or cancel the password lock. See page 49 for details.

MENU ACCESS

/

SPLASH ID SCREEN

MENU POSITION

1 (upper left) / 2 (lower right)

Use to change the position of the menu.

CINEMA MODE

AUTO

The ﬁlm mode will be automatically activated when a ﬁlm source

signal is input.

Select AUTO for normal use.

When ﬂicker occurs on the screen, frame dropping or other incorrect

display occurs, or jaggies on slanting lines are remarkable, select

either FILM or VIDEO, which improves the symptom better.

FILM

Fixed to the ﬁlm mode.

VIDEO

The ﬁlm mode will not be activated.

LANGUAGE

/ English / Español /

Use to select the language used in the menus.

Deutsch / Français / Italiano /

/

/

/

PORTUGUÊS / SVENSKA /

POLSKI / Nederlands/ Norsk /

/ Türkçe / ภาษาไทย /

Bahasa Indonesia / Melayu /

HIGH ALTITUDE MODE

STANDARD

Select this option for normal use.

HIGH ALTITUDE

Select this option for use at an altitude of 1500 to 2700 meters

above the sea level.

EN-34

Image 34

Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Do not keep using the damaged projectorRemoving the batteries from the remote control Checking accessoriesInserting the batteries into the remote control Preparing your projectorOverview Preparing your projectorControl area Remote control IndicatorsBottom side Using the wired remote control Using the remote controlOperational range of the remote control Reception angleSetting by the remote control alone Using the remote controlSetting the ID number of the remote control Setting by using the projectorSetting up the screen Setting up your projectorBefore setting up Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorSetup adjustment Changing the Auto Power OFF settingWhen ﬁne streaks are seen on projected images Setting High Altitude ModeSetting Image Reverse When the projected image is distortedKeystone → Reset → Keystone Adjustment using the Keystone modeAdjustment using the Cornerstone mode Keystone menuARC menu Adjustment using the Curved modeLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu HORIZ. Origin or VERT. Origin menuAdjusting the origin to the vertical arc Be corrected by the CORNERSTONE-mode adjustment *OBEVTUZPSIVNJEQMBDF Front projection, ceiling mountingRear projection /FBSBIFBUFSConnecting the projector to a computer Viewing computer imagesAbout DDC Plugging the power cordViewing computer images For monitor connectionInstalling the terminal cover 3FNPWFUIFMFOTDBQ Conﬁrm the Power indicator lights up redProjecting images Select an input sourceTo stop projecting Direct Power OFF $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Example of the setting procedure for external output When connecting to a notebook computerSetting of the resolution Blanking the screen temporarily BlankWhen a TV tuner or VCR is connected Connecting the projector to video equipmentConnecting to a video player, etc Viewing video imagesViewing video images Projector + DVD player or Hdtv decoderPlugging in the power cord Connection for video equipment having a DVI-D terminalEN-27 Volume from the speaker Setting the aspect ratioHow to change the settings With the remote control With the Feature menu See page 31 for menu settingSignal menu Network menu Information menu Image menu Installation menu Feature menuMenu operation Menu operation How to set the menusPress the  or  button to select an item to adjust Press the  or  button to select a menu to useEnhanced Image menuAuto SeeAuto Power on On / OFF Setting Function Lamp Mode StandardStandby Mode Standard Auto Power OFFHigh Altitude Mode Standard Menu Access Splash ID Screen Menu PositionCinema Mode Auto Aspect NormalSetup Auto Setting Function Advanced Menu EnterVideo Signal Auto / Ntsc / PAL / Secam Reset ALLSignal menu IP Config Enter Setting Function Projector NameNetwork Password Enter Default GatewayLamp Time LOW ResolutionDescription Serial NumberTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempAbout color temperature Adjusting projected imagesColor Enhancer Select an item you want to set using  or  button Adjusting the ﬁneness of the image Super ResolutionAdjusting the tone of each color NCM Select NCM by pressing the  or  buttonHow to adjust the computer image YESTo adjust the vertical position Simple method to adjust the image positionTo adjust the horizontal position LPF Progressive ﬁlterNetwork Password Settings Initial network settingsSetting Projector Name Enabling or disabling the network certiﬁcationSetting or Clearing Dhcp Initial network settingsIP Settings IP Address SettingsDefault Gateway Settings Setting the control systemSubnet Mask Settings Saving IP Config SettingsGlossary Initialization of Network SettingsHow to Use Network Function DhcpSetting procedure Advanced featuresChanging the image displayed at the startup To enable the password function Advanced featuresPassword function To cancel the password functionMagnifying the displayed image Picture in Picture PinPFreeze Major functions PJLink supported commands ConnectionInterval of lamp replacement Replacing the lampReplacing the lamp Reset of the lamp operation timeTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Cleaning of the ﬁlterRemoving the lens Replacing the lensMounting the lens option lens Troubleshooting No image appears on the screen Problem SolutionProblem Solution TroubleshootingImages are not displayed correctly Others Problem Solution Images are not displayed correctly Problem Solution$IFDLUIBUUIFWPMVNFJTOUTFUUPMPX JUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF FOCUS/ZOOM3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF Power Status Filter Condition IndicatorsPower Status Filter Condition Possible Solution Replacement part option/not included in the box SpeciﬁcationsSpeciﬁcations XGA85Composite Sync ConnectorsDimension drawings unit mm Hdmi SerialWith long throw zoom lens OL-XL7100LZ Speciﬁcation of the attached lensWith short throw zoom lens OL-XL7100SZ With tele throw zoom lens OL-XL7100TZWith rear projection short throw OL-XL7100FR ProjectionMitsubishi Electric Corporation