Mitsubishi Electronics XL7000U user manual Adjustment using the Curved mode, ARC menu

Page 15

Setting up your projector (continued)

LOWER RIGHT, LOWER LEFT, UPPER RIGHT, or UPPER LEFT menu

You can adjust the horizontal or vertical position of the selected corner.

Example: Adjustment of the upper left corner position

(UPPER LEFT)

ARC menu

You can correct the arc vertically or horizontally focusing on the screen center.

				Press the 


Press the 				button.	Press the 
Press the 					Press the 
button.					button.

Press the  button.

When you press the  or  button in the RESET mode, the distortion correction is reset.

Press the  button.

Press the  button.

Press the  button.

Press the  button.

Important:

t 8IFOUIF$03/&3450/&NPEFBEKVTUNFOUUBLFT effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

t 8IFOUIF$03/&3450/&NPEFBEKVTUNFOUJT performed, the displayed image may be distorted.

t /PJTFNBZBQQFBSPOUIFTDSFFOEVSJOHUIF CORNERSTONE-mode adjustment because of the type of the video signal being projected and the setting values of the CORNERSTONE- mode adjustment. In such cases, set the

HORIZ. ORIGIN or VERT. ORIGIN menu

When the CURVED-mode adjustment has excessive effect on either top or bottom or either right or left side of the screen, adjust the horizontal or vertical position of the origin to the horizontal or vertical arc. Without the arc adjustment, the image shape won’t change.

Adjusting the origin to the horizontal arc

t 8IFOUIFIPSJ[POUBMBSDBEKVTUNFOUJTOFHBUJWF (or the ARC is adjusted in the  direction)

CORNERSTONE-mode adjustment values in the range where the image is displayed without noise.

t -BSHFEJTUPSUJPOPGUIFJNBHFTIBQFPSBTQFDUSBUJP may not be corrected by the CORNERSTONE -mode adjustment.

Adjustment using the CURVED mode

To adjust images projected on a curved surface, press the ENTER/GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the CURVED mode, and then press the , ,  or  button to correct the distortion.

CURVED
:	0
:	0
ARC
SELECT : BLANK

Every time you press the BLANK button, the adjustment menu changes as follows:

ARC → HORIZ. ORIGIN → VERT. ORIGIN → RESET → ARC...

Press the  button.

Press the  button.

Press the  button.

Press the  button.

EN-15

Image 15

Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Do not keep using the damaged projector Important safeguardsPreparing your projector Checking accessoriesInserting the batteries into the remote control Removing the batteries from the remote controlPreparing your projector OverviewControl area Indicators Remote controlBottom side Reception angle Using the remote controlOperational range of the remote control Using the wired remote controlSetting by using the projector Using the remote controlSetting the ID number of the remote control Setting by the remote control aloneScreen size and projection distance Setting up your projectorBefore setting up Setting up the screenChanging the Auto Power OFF setting Setting up your projectorSetup adjustment Adjusting the position of the projected imageWhen the projected image is distorted Setting High Altitude ModeSetting Image Reverse When ﬁne streaks are seen on projected imagesKeystone menu Adjustment using the Keystone modeAdjustment using the Cornerstone mode Keystone → Reset → KeystoneHORIZ. Origin or VERT. Origin menu Adjustment using the Curved modeLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu ARC menuBe corrected by the CORNERSTONE-mode adjustment Adjusting the origin to the vertical arc /FBSBIFBUFS Front projection, ceiling mountingRear projection *OBEVTUZPSIVNJEQMBDFViewing computer images Connecting the projector to a computerFor monitor connection Plugging the power cordViewing computer images About DDCInstalling the terminal cover Select an input source Conﬁrm the Power indicator lights up redProjecting images 3FNPWFUIFMFOTDBQDirect Power OFF To stop projecting $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Blanking the screen temporarily Blank When connecting to a notebook computerSetting of the resolution Example of the setting procedure for external outputViewing video images Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connectedProjector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having a DVI-D terminal Plugging in the power cordEN-27 Setting the aspect ratio Volume from the speakerWith the Feature menu See page 31 for menu setting How to change the settings With the remote controlImage menu Installation menu Feature menu Signal menu Network menu Information menuMenu operation Press the  or  button to select a menu to use How to set the menusPress the  or  button to select an item to adjust Menu operationSee Image menuAuto EnhancedAuto Power OFF Setting Function Lamp Mode StandardStandby Mode Standard Auto Power on On / OFFAspect Normal Menu Access Splash ID Screen Menu PositionCinema Mode Auto High Altitude Mode StandardReset ALL Setting Function Advanced Menu EnterVideo Signal Auto / Ntsc / PAL / Secam Setup AutoSignal menu Default Gateway Setting Function Projector NameNetwork Password Enter IP Config EnterSerial Number ResolutionDescription Lamp Time LOWTo adjust the tone of white Color Temp Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintAdjusting projected images About color temperatureColor Enhancer Select NCM by pressing the  or  button Adjusting the ﬁneness of the image Super ResolutionAdjusting the tone of each color NCM Select an item you want to set using  or  buttonYES How to adjust the computer imageLPF Progressive ﬁlter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionEnabling or disabling the network certiﬁcation Initial network settingsSetting Projector Name Network Password SettingsIP Address Settings Initial network settingsIP Settings Setting or Clearing DhcpSaving IP Config Settings Setting the control systemSubnet Mask Settings Default Gateway SettingsDhcp Initialization of Network SettingsHow to Use Network Function GlossaryAdvanced features Setting procedureChanging the image displayed at the startup To cancel the password function Advanced featuresPassword function To enable the password functionPicture in Picture PinP Magnifying the displayed imageFreeze Major functions Connection PJLink supported commandsReplacing the lamp Interval of lamp replacementReset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the ﬁlter MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensReplacing the lens Removing the lensMounting the lens option lens No image appears on the screen Problem Solution TroubleshootingTroubleshooting Problem SolutionImages are not displayed correctly Images are not displayed correctly Problem Solution Others Problem Solution$IFDLUIBUUIFWPMVNFJTOUTFUUPMPX FOCUS/ZOOM JUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF Indicators Power Status Filter ConditionPower Status Filter Condition Possible Solution Speciﬁcations Replacement part option/not included in the boxXGA85 SpeciﬁcationsHdmi Serial ConnectorsDimension drawings unit mm Composite SyncWith tele throw zoom lens OL-XL7100TZ Speciﬁcation of the attached lensWith short throw zoom lens OL-XL7100SZ With long throw zoom lens OL-XL7100LZProjection With rear projection short throw OL-XL7100FRMitsubishi Electric Corporation