Advanced features (continued)
Supervising and controlling by computer
You can supervise and control the projector’s operation using a personal computer via a LAN.
Major functions
ProjectorView Global+
Batch projector controlling / supervising application software
t #BUDIPQFSBUJPOPGTUBOEBMPOFQSPKFDUPSNVMUJQMF projectors
t 4DIFEVMJOHGVODUJPOUPUVSO0/0''GPSFBDIEBZPG the week
t $IFDLJOHFBDIDPOEJUJPOPGUIFQSPKFDUPSBOE detecting a theft
t 4FUUJOHPGUIFQSPKFDUPST*1$0/'*(
t 4UBSUVQPGUIFDPOUSPMMJOHTVQFSWJTJOHUPPM (ProjectorView) using the Web browser
t "DUJWBUJOH7JTVBM1"UPEJTQMBZUIFTQFDJmFE characters on the projector’s screen
t 1SPKFDUPST5FYU4QFFDIGVODUJPOUPSFBEBMPVE messages displayed on the Visual PA2 window
ProjectorView
The controlling /supervising tool using the Web browser
t $POUSPMMJOHBOETVQFSWJTJOHBTJOHMFQSPKFDUPS t 4FUUJOHPGUIFQSPKFDUPSTOFUXPSLGVODUJPO
t 4FUUJOHPGUIF"MFSU&NBJMTFSWJDFPGUIFQSPKFDUPS
AMX Device Discovery
The projector is monitored and controlled by the control system of AMX.
Crestron RoomView Connected™
The projector is monitored and controlled by the control system and software of Crestron Electronics, Inc.
PJLink™
This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers.
About ProjectorView Global+ and ProjectorView t
manual” in the |
|
About AMX Device Discovery |
|
t 5IJTJTBUFDIOPMPHZTVHHFTUFECZ".9UP |
|
facilitate configuration of the control system |
|
of AMX and its target devices. To use this |
|
technology, it is necessary to set CONTROL |
|
SYSTEM in the NETWORK menu. (See pages 37 |
|
and 46.) |
|
For details, see the website of AMX. |
|
URL http://www.amx.com/ |
|
About Crestron RoomView Connected™ |
|
t 5IJTJTBUFDIOPMPHZTVHHFTUFECZ$SFTUSPO |
|
Electronics, Inc. to facilitate configuration of the |
|
control system of Crestron and its target devices. |
|
To use this technology, it is necessary to set |
|
CONTROL SYSTEM in the NETWORK menu. |
|
(See pages 37 and 46.) |
|
For details, see the website of Crestron |
|
Electronics, Inc. |
|
URL http://www.crestron.com |
|
URL http://www.crestron.com/getroomview/ |
|
Important:
t
t
About PJLink™
t
t 5PVTFUIJTGVODUJPOTFUUIFOFUXPSLDFSUJmDBUJPO properly according to the setting of the network application to be used. (See page 44.)
t
t 5IJTQSPKFDUPSJTGVMMZDPNQMJBOUUPUIF specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications Version 1.0.
Important:
t
t The control may not be performed correctly or the monitoring data may not be obtained correctly in the following conditions:
·During standby
·During zoom/focus adjustment
·During lens shift adjustment
·During input source switching
·During auto position execution
·During BLANK
·During command processing
·Before the splash screen disappears after the power is turned on.
t During zoom/focus adjustment, lens shift adjustment, BLANK, etc., it may take approx. 5 seconds to receive a response to a command.
t Use 1 controller to control/monitor 1 projector.
t For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use.
t 8IFOZPVNPOJUPSUIFQSPKFDUPSTPQFSBUJOHTUBUF using this function by issuing inquiry commands successively, issue an inquiry command after receiving the response to the previous inquiry command from the projector.