Mitsubishi Electronics XL7000U Picture in Picture PinP, Magnifying the displayed image, Freeze

Page 50

Advanced features (continued)

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

t 8IJMFWJFXJOHUIFJNBHFGSPNUIF$0.165&3 COMPUTER2, DVI, or HDMI input source, you can display the image from the VIDEO or S-VIDEO input source as a sub image.

Magnifying the displayed image

By pressing the MAGNIFY button on the remote control, you can magnify the image to view the details. t 8IJMFWJFXJOHUIFJNBHFGSPNUIF$0.165&3

COMPUTER2, DVI, or HDMI input source, you can magnify the image.

Sub image

To use the PinP mode

1.Press the PinP button on the remote control.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control.

3.Press the PinP button again to exit the PinP mode.

To change the position of the sub image:

Press the or button on the remote control.

Magnified image

To use the MAGNIFY mode:

1.Press the MAGNIFY button on the remote control.

t You can select the area to be magnified by pressing the , , or button on the remote control.

t You can change the magnification of the selected area by pressing the + or - button.

2.Press the MAGNIFY button again to exit the MAGNIFY mode.

t The regular operation screen will appear.

Important:

t The MAGNIFY mode doesn’t function with some input signals. For details, see page 64.

t In the MAGNIFY mode, you can’t adjust the volume.

Important:

t 5IF1JO1NPEFJTBWBJMBCMFPOMZXIFOUIF"41&$5 ratio is set to NORMAL.

t The PinP mode isn’t available with some input signals. For further information, see page 64.

t 8IFOUIFNBJOJNBHFTJHOBMJTMPTUEVSJOHUIF1JO1 mode, the PinP mode is disabled.

t When the COMPUTER 1, COMPUTER 2, DVI-D (HDCP) or HDMI button on the remote control is pressed, the PinP mode will be canceled.

t 8IFOUIFSFJTOPWJEFPTJHOBMGPSTVCJNBHFZPV can’t change the display position.

t The motion may not run smoothly in the PinP mode.

t 5IFTJ[FPGUIFTVCJNBHFWBSJFTEFQFOEJOHPOUIF input signal and the settings.

Freeze

To stop the motion in the image temporarily (or to display a still image):

Press the FREEZE button on the remote control. t The image will freeze temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

t %POPUEJTQMBZBTUJMMQJDUVSFGPSBMPOHUJNF because the afterimages may persist on the screen. (See page 59.)

EN-50

Image 50
Contents XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Do not keep using the damaged projectorRemoving the batteries from the remote control Checking accessoriesInserting the batteries into the remote control Preparing your projectorControl area Preparing your projectorOverview Bottom side IndicatorsRemote control Using the wired remote control Using the remote controlOperational range of the remote control Reception angleSetting by the remote control alone Using the remote controlSetting the ID number of the remote control Setting by using the projectorSetting up the screen Setting up your projectorBefore setting up Screen size and projection distanceAdjusting the position of the projected image Setting up your projectorSetup adjustment Changing the Auto Power OFF settingWhen fine streaks are seen on projected images Setting High Altitude ModeSetting Image Reverse When the projected image is distortedKeystone → Reset → Keystone Adjustment using the Keystone modeAdjustment using the Cornerstone mode Keystone menuARC menu Adjustment using the Curved modeLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu HORIZ. Origin or VERT. Origin menuAdjusting the origin to the vertical arc Be corrected by the CORNERSTONE-mode adjustment *OBEVTUZPSIVNJEQMBDF Front projection, ceiling mountingRear projection  /FBSBIFBUFSConnecting the projector to a computer Viewing computer imagesAbout DDC Plugging the power cordViewing computer images For monitor connectionInstalling the terminal cover  3FNPWFUIFMFOTDBQ Confirm the Power indicator lights up redProjecting images Select an input source $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Direct Power OFFTo stop projecting Example of the setting procedure for external output When connecting to a notebook computerSetting of the resolution Blanking the screen temporarily BlankWhen a TV tuner or VCR is connected Connecting the projector to video equipmentConnecting to a video player, etc Viewing video imagesViewing video images Projector + DVD player or Hdtv decoderPlugging in the power cord Connection for video equipment having a DVI-D terminalEN-27 Volume from the speaker Setting the aspect ratioHow to change the settings With the remote control With the Feature menu See page 31 for menu settingMenu operation Image menu Installation menu Feature menuSignal menu Network menu Information menu Menu operation How to set the menusPress the  or  button to select an item to adjust Press the  or  button to select a menu to useEnhanced Image menuAuto SeeAuto Power on On / OFF Setting Function Lamp Mode StandardStandby Mode Standard Auto Power OFFHigh Altitude Mode Standard Menu Access Splash ID Screen Menu PositionCinema Mode Auto Aspect NormalSetup Auto Setting Function Advanced Menu EnterVideo Signal Auto / Ntsc / PAL / Secam Reset ALLSignal menu IP Config Enter Setting Function Projector NameNetwork Password Enter Default GatewayLamp Time LOW ResolutionDescription Serial NumberTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempColor Enhancer Adjusting projected imagesAbout color temperature Select an item you want to set using  or  button Adjusting the fineness of the image Super ResolutionAdjusting the tone of each color NCM Select NCM by pressing the  or  buttonHow to adjust the computer image YESTo adjust the vertical position Simple method to adjust the image positionTo adjust the horizontal position LPF Progressive filterNetwork Password Settings Initial network settingsSetting Projector Name Enabling or disabling the network certificationSetting or Clearing Dhcp Initial network settingsIP Settings IP Address SettingsDefault Gateway Settings Setting the control systemSubnet Mask Settings Saving IP Config SettingsGlossary Initialization of Network SettingsHow to Use Network Function DhcpChanging the image displayed at the startup Advanced featuresSetting procedure To enable the password function Advanced featuresPassword function To cancel the password functionFreeze Picture in Picture PinPMagnifying the displayed image Major functions PJLink supported commands ConnectionInterval of lamp replacement Replacing the lampTo replace the lamp Reset of the lamp operation timeReplacing the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Cleaning of the filterMounting the lens option lens Replacing the lensRemoving the lens Troubleshooting No image appears on the screen Problem SolutionImages are not displayed correctly TroubleshootingProblem Solution $IFDLUIBUUIFWPMVNFJTOUTFUUPMPX Images are not displayed correctly Problem SolutionOthers Problem Solution 3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF FOCUS/ZOOMJUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF Power Status Filter Condition Possible Solution IndicatorsPower Status Filter Condition Replacement part option/not included in the box SpecificationsSpecifications XGA85Composite Sync ConnectorsDimension drawings unit mm Hdmi SerialWith long throw zoom lens OL-XL7100LZ Specification of the attached lensWith short throw zoom lens OL-XL7100SZ With tele throw zoom lens OL-XL7100TZWith rear projection short throw OL-XL7100FR ProjectionMitsubishi Electric Corporation