Microtek CX4 manual Connecting To A Set-top Box

Page 17

Connecting To A Set-top Box

projector.

If the functions of the wireless mouse on the Remote Control need to be operated, please make the connections to each signal cable according to the steps numbered 6 ~ 8 below:

6.Connect the Control Cable to the Control port of the projector.

7.Connect the Mac Mouse Cable to the PS/2 Mouse connector of the Control Cable.

8.Connect the other end of the Mac Mouse Cable to the mouse port of the PowerBook.

You may connect your computer to the USB interface of the projector so to enable the function of the wireless mouse on the remote control. Please follow the step numbered 9 for connection.

9.Connect one end of the USB Cable to the USB port of the projector, and connect the other end of the USB Cable to the USB port of your computer.

10.Tighten all connector screws to ensure secure connections.

Connecting To A Set-top Box

Before connecting the projector to a Set-top Box, make sure that the power of

16

Image 17

Contents Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Transporting Your Projector Remote Control InformationWarning： Remote Control Briefing FunctionsINSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Desktop Computer Connecting To A Computer5. Remove the computer mouse cable 8. Tighten all connector screws to ensure secure connections4. Connect the Control Cable to the Control port of the projector Data Projector Connecting To A NotebookDVI Source Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connection of an audio cable from a computer source Connecting To An Audio SourceConnection of an audio cable from a video audio source Data Projector Connecting To An External SpeakerSpeaker or PA THIS PROJECTOR HOW TO OPERATETurning The Equipment On And Off Page The Focus and Zoom Functions How To Adjust The Projected ImageThe Resize key The Auto KeyHow To Operate This Projector Buttons The Buttons on the Operation Panel of the Projector & Their FunctionsFunctions likeNote The ZOOM & FOCUS functions are not suitable to this model The Buttons on the Remote Control & Their FunctionsThe life of the lamp has ended, please replace with Examine The Projector StatusThe life of the lamp will soon end, please prepare a USING THE OSD MENU How To Change OSD Settings How To Access The OSD MenuOSD Menu BrightnessContrast Black LevelPosition ImageMiscellaneous Auto ConfigurationInformation Save Input SelectVideo Keystone VolumeProjection Mode MouseLanguage MAINTENANCE Cleaning the Projector Case Cleaning the LensCleaning the Air Filter The Steps of Cleaning the Air FilterThe Steps of Replacing a Lamp Replacing The Projector Lamp4. Lift up the handle and pull out the lamp 1. Turn the power of the projector off and unplug the power cord3. Loosen the screws on the lamp case with a coin or screw driver 8. Position the lamp cover you took off in step 7. Tighten the lamp case you took off in stepTROUBLESHOOTING When the Power Led Indicator does not light up Problem With The ProjectorWhen the Projector Lamp does not light up The Power Indicator remains redNo image appears on the screen Problems With The Image Or SoundThe Power Indicator is blinking red Abnormal Image Coloring The words ‘No Signal’ appear on the screenUnstable Image Displayed by VHS Video Player No response with remote controlNo Sound TECHNICAL SPECIFICATIONSProjector lamp GeneralOptical Environmental Mechanical with lens and feetElectrical Resize Display Supported Monitor DisplaysSupport Modes Computer In and Monitor Connector Pin Assignments