Microtek CX4 manual Language

Page 39

“Mouse” icon for the interface of mouse device. In the “Mouse” box, you will see the “PS2”, “USB” and “MAC” bars.

When the interface of mouse device is PS2, then just select “PS2”. When the interface of mouse device is USB, then just select “USB”.

If it is the MAC mouse, the Control Cable (for PS2) needs to connect with a MAC Mouse Cable and then select “MAC”.

Language

The whole OSD menu can be in complicated Chinese, simplified Chinese and English versions. You may enter the “Language” icon under OSD menu to select the proper language.

Attention: To turn off the projector, ensure to follow steps described in “How to operate this projector”. Before it’s power is off, the projector will save the adjustment value of each function offered by the OSD menu automatically. For instance, adjustment value of the “Brightness” or “Black Level” function which derives from the computer input will be saved automatically before the projector is powered off.

38

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Transporting Your Projector Remote Control InformationWarning： Remote Control Briefing FunctionsINSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Desktop Computer Connecting To A Computer8. Tighten all connector screws to ensure secure connections 4. Connect the Control Cable to the Control port of the projector5. Remove the computer mouse cable Connecting To A Notebook DVI SourceData Projector Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connection of an audio cable from a computer source Connecting To An Audio SourceConnection of an audio cable from a video audio source Connecting To An External Speaker Speaker or PAData Projector THIS PROJECTOR HOW TO OPERATETurning The Equipment On And Off Page The Focus and Zoom Functions How To Adjust The Projected ImageThe Resize key The Auto KeyHow To Operate This Projector like The Buttons on the Operation Panel of the Projector & Their FunctionsButtons FunctionsNote The ZOOM & FOCUS functions are not suitable to this model The Buttons on the Remote Control & Their FunctionsExamine The Projector Status The life of the lamp will soon end, please prepare aThe life of the lamp has ended, please replace with USING THE OSD MENU Brightness How To Access The OSD MenuHow To Change OSD Settings OSD MenuImage Black LevelContrast PositionAuto Configuration InformationMiscellaneous Input Select VideoSave Mouse VolumeKeystone Projection ModeLanguage MAINTENANCE The Steps of Cleaning the Air Filter Cleaning the LensCleaning the Projector Case Cleaning the Air FilterThe Steps of Replacing a Lamp Replacing The Projector Lamp1. Turn the power of the projector off and unplug the power cord 3. Loosen the screws on the lamp case with a coin or screw driver4. Lift up the handle and pull out the lamp 8. Position the lamp cover you took off in step 7. Tighten the lamp case you took off in stepTROUBLESHOOTING The Power Indicator remains red Problem With The ProjectorWhen the Power Led Indicator does not light up When the Projector Lamp does not light upProblems With The Image Or Sound The Power Indicator is blinking redNo image appears on the screen Abnormal Image Coloring The words ‘No Signal’ appear on the screenNo response with remote control No SoundUnstable Image Displayed by VHS Video Player TECHNICAL SPECIFICATIONSGeneral OpticalProjector lamp Mechanical with lens and feet ElectricalEnvironmental Resize Display Supported Monitor DisplaysSupport Modes Computer In and Monitor Connector Pin Assignments
Top Page Image Contents