Microtek CX4 manual Connecting To A Macintosh Desktop Computer

Page 15

Connecting To A Macintosh Desktop Computer

4.Connect one end of the USB Cable to the USB port of the projector, and connect the other end of the USB Cable to the USB port of your computer.

5.Tighten all connector screws to ensure secure connections.

Connecting To A Macintosh Desktop Computer

Before connecting this projector to a Macintosh desktop computer, make sure that both machines have the power shut off.

1.Remove the Mac monitor cable from the Mac.

2.Set the DIP switches of the Mac Adapter in accordance with the desired resolutions (i.e. 19” mode).

3.Then, connect the Computer Cable to one end of the Mac Adapter.

4.Tighten all connector screws to ensure secure connections.

5.Connect the other end of the Mac Adapter to the Mac.

6.Connect the other end of the Computer Cable to the Computer In port of the projector.

7.If necessary, connect the Mac monitor to the Computer Out port of the projector.

If the functions of the wireless mouse on the Remote Control need to be operated, please make the connections to each signal cable according to the steps numbered 8 ~ 10 below:

8.Connect the Control Cable to the Control port of the projector.

14

Image 15

Contents Page INTRODUCTION Safety Instructions If the power cable or plug is damaged or frays Where To Get Help Transporting Your Projector Remote Control InformationWarning： Remote Control Briefing FunctionsINSTALLATION Unpacking The Projector Setting Up The Projector Do not mix used and new batteries Connecting To A Desktop Computer Connecting To A Computer8. Tighten all connector screws to ensure secure connections 4. Connect the Control Cable to the Control port of the projector5. Remove the computer mouse cable Connecting To A Notebook DVI SourceData Projector Connecting To A Macintosh Desktop Computer Connecting To A Macintosh PowerBook Connecting To A Set-top Box Connecting To A Video Source The steps of connecting the projector to the video source Page Connection of an audio cable from a computer source Connecting To An Audio SourceConnection of an audio cable from a video audio source Connecting To An External Speaker Speaker or PAData Projector THIS PROJECTOR HOW TO OPERATETurning The Equipment On And Off Page The Focus and Zoom Functions How To Adjust The Projected ImageThe Resize key The Auto KeyHow To Operate This Projector like The Buttons on the Operation Panel of the Projector & Their FunctionsButtons FunctionsNote The ZOOM & FOCUS functions are not suitable to this model The Buttons on the Remote Control & Their FunctionsExamine The Projector Status The life of the lamp will soon end, please prepare aThe life of the lamp has ended, please replace with USING THE OSD MENU Brightness How To Access The OSD MenuHow To Change OSD Settings OSD MenuImage Black LevelContrast PositionAuto Configuration InformationMiscellaneous Input Select VideoSave Mouse VolumeKeystone Projection ModeLanguage MAINTENANCE The Steps of Cleaning the Air Filter Cleaning the LensCleaning the Projector Case Cleaning the Air FilterThe Steps of Replacing a Lamp Replacing The Projector Lamp1. Turn the power of the projector off and unplug the power cord 3. Loosen the screws on the lamp case with a coin or screw driver4. Lift up the handle and pull out the lamp 8. Position the lamp cover you took off in step 7. Tighten the lamp case you took off in stepTROUBLESHOOTING The Power Indicator remains red Problem With The ProjectorWhen the Power Led Indicator does not light up When the Projector Lamp does not light upProblems With The Image Or Sound The Power Indicator is blinking redNo image appears on the screen Abnormal Image Coloring The words ‘No Signal’ appear on the screenNo response with remote control No SoundUnstable Image Displayed by VHS Video Player TECHNICAL SPECIFICATIONSGeneral OpticalProjector lamp Mechanical with lens and feet ElectricalEnvironmental Resize Display Supported Monitor DisplaysSupport Modes Computer In and Monitor Connector Pin Assignments