OTC Wireless WiSER2400.Plus, WiSER2400.IP technical manual Wireless Port, Ssid

3.4.3 Wireless Port

Wireless Settings
SSID:	The SSID of the access point the WiSER2400 is
	to be associated with; or the peer-to-peer group
	ID when the WiSER2400 is operated in the ad-
	hoc mode. Maximum: 32 characters. A blank
	entry is allowed.	When left blank, the
	WiSER2400 would interpret it as ‘ANY’ and will
	try to join any available open wireless network.
Network Type:
Infrastructure mode:	for the WiSER2400 to be connected to an
	access point.
Ad-Hoc mode:	for the WiSER2400 to join a peer-to-peer
	wireless network.
	Default value: Infrastructure.
Channel:	For setting the RF channel of the WiSER2400
	when operated in the “Ad-Hoc” mode.
	Supported value:	1 to 11 (US)
		1 to 13 (International).
Advanced Wireless Settings
Transfer Rate:	For setting up the wireless data transmission
	rate. Six choices available in the pull-down
	menu.

Fragmentation Threshold: For setting up the fragmentation threshold for the wireless packet. Default value: 2436. Lower value recommended for operation in a noisy RF environment.

RTS Threshold: For setting up the RTS threshold for the wireless packet. Lower value recommended for operation in a network with potential hidden-nodes problems.

Fig. 16 WiSER2400 administration software

Configuration/Wireless Port panel

WiSER 2400 Technical Manual Version 2.16 Copyright  2001-2005, OTC Wireless, Inc. All Rights Reserved Page 25 of 32