3.4.2 Serial-IP-Proxy
MAC Address: the MAC address of the WiSER2400. This field is not modifiable.
DHCP Enable: Allows the WiSER2400 to obtain IP address from a DHCP server.
IP Address: The IP address of the WiSER2400, user configurable.
Listen Port: The port number used by the WiSER2400 to communicate. This is the source port number in the TCP/UDP packets sent from this WiSER2400. Default value: 8002.
Subnet Mask: For configuring the subnet mask settings.
Gateway: For specifying the IP address of the Gateway.
Protocol
TCP (Client): For setting the WiSER2400 as a TCP Client.
TCP (Server): For setting the WiSER2400 as a TCP Server.
UDP: | For setting up the WiSER2400 to run UDP protocol: |
Receive Broadcast Packet: Optional operation mode to enable the WiSER2400 to receive UDP broadcast packets.
Send Serial Data Broadcast: Optional operation mode to enable the data received from the WiSER2400 serial port to be transmitted wirelessly as UDP broadcast packets.
Note: The WiSER2400 can only operate in either UDP mode or TCP mode, but not in both modes simultaneously.
Fig. 15 WiSER2400 administration software
Configuration/Serial-IP-Proxy panel
WiSER 2400 Technical Manual | Version 2.16 | Copyright | Page 24 of 32 |