Onkyo TX-SR604/604E Changing the Speaker Settings Manually, Using a Powered Subwoofer

First Time Setup—Continued

Auto Speaker Setup

========================

Review SP Distance

Front :15ft

Center :15ft

SurrRight : 7ft

SurrBack R : 7ft

SurrBack L : 7ft

SurrLeft : 7ft

Subwoofer :15ft

Auto Speaker Setup

========================

Review SP Level

Left	:	+12dB
Center	:	0dB
Right	:	-12dB
SurrRight	:	+3dB
SurrBack R :		+4dB
SurrBack L :		-6dB
SurrLeft	:	-3dB
Subwoofer	:	0dB

Press the [RETURN] button to return to the previous menu.

Changing the Speaker Settings Manually

In some situations, the measurements taken by the auto- matic speaker setup may not provide usable results. If running the speaker setup a second time still doesn’t pro- vide usable results, you’ll have to set the speaker settings manually (see pages 67–71).

Using a Powered Subwoofer

If you’re using a powered subwoofer, because it outputs very low-frequency sound and its position is usually low, it may not be detected by the automatic speaker setup. If the subwoofer (SW) appears on the SP Detect Result screen as “No,” increase the subwoofer’s volume, set it to its highest crossover frequency, and then try running the automatic speaker setup again. Note that if the vol- ume is set too high and the sound distorts, it may not be detected, so use an appropriate volume level. If the sub- woofer has a low-pass filter switch, set it to Off or Direct. Refer to your subwoofer’s instruction manual for details.

42