Onkyo TX-SR604/604E Speaker Level Calibration, Repeat until the volume, Is the same

Advanced Setup—Continued

Speaker Level Calibration

This setting is set automatically by the Automatic Speaker Setup function (see page 38).

Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position.

Note:

The speakers cannot be calibrated while the output of the AV receiver is muted or while a pair of headphones is connected.

ON/STANDBY		REMOTE MODE
	ZONE2

1			RECEIVER	DVD
			TAPE
	INPUT SELECTOR			M D/CDR
	1	2	3	CD
				HDD
	V1	V2	V3
	4	5	6	T V
	V4	MULTI CH	DVD
	7	8	9	VCR
	TAPE	TUNER	CD	CABLE
	10	11	12
	+10	0	CLR	SAT
	D TUN	ENT
	--/---	DIMMER	SLEEP
	TV	VOL	CH	VOL
			DISC
			ALBUM
	INPUT
2	GUIDE			PREVIOUS
	TOP MENU			MENU

MUTING

ENTER 2, 3

PLAYLIST/CATPLAYLIST/CAT

RETURN SETUP 1, 5

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.
SETUP

2	Use the Up and Down [			]/[	]
	buttons to select “3. Level Cali-
	bration,” and then press
	[ENTER].
	The Level Calibration menu appears
	and the pink noise test tone is output by
	the front left speaker.
	3.Level Calibration
	------------------------
	a.Left	:	0dB
	b.Center	:	0dB
	c.Right	:	0dB
	d.SurrRight	:	0dB
	e.SurrBack R :		0dB
	f.SurrBack L :		0dB
	g.SurrLeft	:	0dB
	h.Subwoofer	:	0dB
	Note:
	Speakers that you set to No or None on
	the Speaker Configuration page
	(page 67) cannot be selected.
3	Use the Up and Down [			]/[	]
	buttons to select each speaker,
	and use the Left and Right [				]/
	[ ] buttons to set the volume.

The volume can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

4	Repeat step 3 until the volume of
	the test tone from each speaker
	is the same.
5	Press the [SETUP] button.
	The setup menu closes.
	SETUP

Note:

This procedure can also be performed by using the remote controller. First press the [TEST TONE] button to output the test tone. Use the [LEVEL–] and [LEVEL+] buttons to set the volume, and use the [CH SEL] button to select the speakers.

70