Onkyo TX-SR674/674E, TX-SR604/604E IntelliVolume, Volume Setup/OSD Setup, Miscellaneous Setup

Advanced Setup—Continued

IntelliVolume

You can set the input level for each input source. This is useful if some of your AV components are louder or qui- eter than others. IntelliVolume does not affect Zone 2.

While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.

1 RECEIVER	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu appears onscreen.

SETUP

2			Use the Up and Down [ ]/[ ]
			buttons to select “6. Input
			Setup,” and then press [ENTER].
			The Input Setup menu appears.
			6.Input Setup
			--------DVD/MCH---------
			a.IntelliVolume: 0dB
			Listening Mode Preset
			b.Ana/PCM:Last Valid
			c.Dolby D:Last Valid
			d.DTS	:Last Valid
			e.D.F.2ch:Last Valid
			f.Mono	:Last Valid
			g.MCH Ana:Last Valid
3			Use the INPUT SELECTOR but-
1	2	3	tons on the remote controller to
			select the input source that you
V1	V2	V3
4		6	want to set.
V4		DVD
7	8	9
TAPE	TUNER	CD

4 Use the Up and Down []/[ ]

buttons to select “a. IntelliVolume.”

If a component is too loud compared to your other components, use the Left

[] button to adjust the level. If it’s too quiet, use the Right [ ] button.

•The level can be set from –12 dB to +12 dB.

Volume Setup/OSD Setup

This section explains the items on the Miscellaneous Setup menu.

1 RECEIVER Press the [RECEIVER] button fol-

lowed by the [SETUP] button. The main menu appears onscreen.

SETUP

2	Use the Up and Down [ ]/[ ]
	buttons to select
	“7. Miscellaneous Setup,” and
	then press [ENTER].
	The Miscellaneous Setup menu
	appears.
	7.Miscellaneous Setup
	------------------------
	a.MaximumVolume: Off
	b.PowerOnVolume: Last
	c.Immediate Display
	:Normal

3	Use the Up and Down [ ]/[	]
	buttons to select the settings,
	and use the Left and Right [	]/

[ ] buttons to set them.

The settings are explained on page 76.

4	When you’ve finished, press the
	[SETUP] button.
	The setup menu closes.
SETUP

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

75