Onkyo TX-SR604/604E, TX-SR674/674E instruction manual Digital Input

First Time Setup—Continued

Digital Input

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selec- tor. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed.

Input selector buttons

	DIGITAL INPUT
Here are the default assignments.
Input selector	Default assignment
DVD	COAX1
VIDEO 1	OPT1
VIDEO 2	----
VIDEO 3	OPT2
TAPE	----
CD	OPT3

When HDMI IN 1 or 2 is assigned to an input selector in the “HDMI Video Setup” on page 45, the input selector assignment on this page is automatically set to HDMI 1 or HDMI 2.

1			Press the input selector button
DVD	VIDEO 1	VIDEO 2	for the source that you want to
			assign.
	VCR 1	VCR 2	(Digital inputs cannot be assigned to
VIDEO 3	VIDEO 4	TAPE	the TUNER input source)
	C D

2	Press the [DIGITAL INPUT] but-
DIGITAL	ton.
INPUT	The current assignment appears.

3

DIGITAL

INPUT

Press the [DIGITAL INPUT] but- ton repeatedly to select COAX1, COAX2, OPT1, OPT2, OPT3, or

–– – – (analog).

•An input selector that has been assigned to IN1 or IN2 in the “HDMI Video Setup” (page 45) can be set to HDMI here.

•There are no assignments for

TUNER.

•VIDEO 4 is used only for digital input from the front panel terminals.

Examples:

If you connect your DVD player to the OPTICAL IN 2 jack, set “DVD” to “OPT2.”

If you want to listen to audio from the component connected to the OPTICAL IN 3 jack when the VIDEO 1 input selector is selected, set “VIDEO1” to “OPT3.”

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the VIDEO 2 input selector is selected, set “VIDEO2” to “COAX1.”

For input selectors that you don’t want to assign a digital input jack, set to “---- (analog).”

44