Onkyo TX-SR604/604E, TX-SR674/674E instruction manual Front & Rear Panels

Front & Rear Panels—Continued

HArrow/TUNING/PRESET & ENTER buttons

When the AM or FM input source is selected, the

TUNING [ ] [ ] buttons are used to tune the tuner, and the PRESET [ ] [ ] buttons are used to select radio presets (see page 53). When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The [ENTER] button is also used with the onscreen setup menus.

ISETUP button

This button is used to access the onscreen setup menus that appear on the connected TV.

JMASTER VOLUME control (49)

This control is used to adjust the volume of the AV receiver to MIN, 1 through 99, or MAX.

KVIDEO 4 INPUT

This input can be used to connect a camcorder, game console, and so on. There are jacks for optical digital audio, S-Video, composite video, and analog audio.

LSETUP MIC (38)

The included speaker setup microphone is con- nected here for automatic speaker setup.

MTUNING MODE button (52)

This button is used to select the Auto or Manual tun- ing mode.

NMEMORY button (53)

This button is used when storing or deleting radio presets.

ODIMMER or RT/PTY/TP button (51, 55)

DIMMER is used to adjust the display brightness.

On the European model, this is the RT/PTY/TP but- ton, and it’s for RDS (Radio Data System). See “Using RDS (European models only)” on page 54.

PDIGITAL INPUT button (44, 77)

This button is used to assign the digital inputs and to specify the format of digital input signals.

QDISPLAY button (50)

This button is used to display various information about the currently selected input source.

R LISTENING MODE [ ] [ ] buttons (61)

These buttons are used to select the listening modes.

SSTEREO button (61)

This button is used to select the Stereo listening mode.

TTONE, [–] & [+] buttons (50)

These buttons are used to adjust the bass and treble.

UZONE 2 LEVEL button (82)

This button is used to set the volume for Zone 2.

VZONE 2/OFF button (81)

The ZONE 2 button is used to select the input source for Zone 2.

The OFF button is used to turn off the output of Zone 2.

WPHONES jack (51)

This 1/4-inch phone jack is for connecting a stan- dard pair of stereo headphones for private listening.

XPURE AUDIO button and indicator (61)

The North American models do not have this button and indicator.

Selects the Pure Audio listening mode. The indica- tor lights up when this mode is selected.

8