Onkyo TX-SR502E instruction manual Using the Listening Modes, Selecting Listening Modes

TX-SR502_En.book Page 41 Tuesday, February 17, 2004 12:14 PM

Using the Listening Modes—Continued

Selecting Listening Modes

See “About the Listening Modes” on page 42 for detailed information about the listening modes.

•The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the TX-SR502/TX-SR502E with a digital audio connection (coaxial or opti- cal).

•Listening mode availability depends on the format of the current input signal.

•While speaker set B is on or a pair of head- phones are connected, you can only select the Pure Audio, Direct or Stereo listening mode.

•While the multichannel input is being used, only the Pure Audio and Direct listening modes can be selected.

Selecting with the Remote Controller

• American model

ALL ST	REC	SP A	SP B	RANDOM
SURR	AUDIO	SUBTITLE ANGLE		LAST M	STEREO
	SURR	ALL ST		STEREO
	REPEAT	A-B	SEARCH MEMORY
DIRECT		DIRECT	DSP	DSP	DSP
	TEST TONE	CH SEL	LEVEL-	LEVEL+
	OPEN/CLOSE VIDEO OFF
			L NIGHT	CINE FLTR

			RC-567M
•	Other models
	ALL ST	REC	SP A	SP B	RANDOM
		AUDIO	SUBTITLE ANGLE		LAST M
	SURR					STEREO
		SURR	ALL ST		STEREO
	PURE A	REPEAT	A-B	SEARCH MEMORY
		PURE A	DIRECT	DSP	DSP	DSP
	DIRECT	TEST TONE	CH SEL	LEVEL-	LEVEL+
		OPEN/CLOSE VIDEO OFF
				L NIGHT	CINE FLTR
			RC-569M

Selecting on the TX-SR502/TX-SR502E

• American model • Other models

■ [PURE A] button (not American model)

This button selects the Pure Audio listening mode.

When this mode is selected, the TX-SR502/

TX-SR502E outputs no video signals and its display

STANDBY/ON

	STANDBY
A SPEAKERS B	TONE	STEREO	LISTENING	DISPLAY	DIGITAL INPUT
			MODE
PHONES	MULTI CH	DVD	VIDEO 1	VIDEO 2	VIDEO 3
			VCR

STEREO

LISTENING MODE

STANDBY/ON

		PURE AUDIO
POWER		STANDBY
ON OFF
A SPEAKERS B	TONE	PURE AUDIO		LISTENING	DISPLAY	DIGITA
				MODE
PHONES		MULTI CH	DVD	VIDEO 1	VIDEO 2	VIDEO
				VCR

PURE AUDIO

LISTENING MODE

is turned off.

■ [DIRECT] button

This button selects the Direct listening mode.

■ [STEREO] button

This button selects the Stereo listening mode.

■ [SURR] button

This button selects the Dolby Digital and DTS listen-

■[PURE AUDIO] button (not American model)

This button selects the Pure Audio listening mode. When this mode is selected, the TX-SR502/ TX-SR502E outputs no video signals and its display is turned off.

■[STEREO] button (American model only)

This button selects the Stereo listening mode.

■LISTENING MODE [] [ ] buttons

These buttons select all of the listening modes that can be used with the current input source.

The surround modes available also depends on the Dolby Digital/DTS setting (see page 44).

ing modes. The modes available depends on the

Dolby Digital/DTS setting.

When the multichannel DVD input is selected, this

button is also used when adjusting the bass and tre-

ble (see page 38).

■ [ DSP] & [DSP ] buttons

These buttons select the Onkyo original DSP modes.

■ [All ST] button

This button selects the All Ch Stereo listening mode.

41