Operating (continued)
Selecting The Aspect Ratio
1 | Press the Aspect button to toggle between the |
modes for aspect ratio. |
■At a M1-D signal
NORMAL 4:3 16:9
memo NORMAL keeps the original aspect ratio of the input signal.
■At a RGB signal (not M1-D)
4:3 16:9
■At a video signal
4:3 16:9 SMALL
memo At a HDTV signal of 1125i or 750p, only 16:9 can be selected.
LASER INDICATOR
STANDBY/ON VIDEO RGB
+ + +
LENS SHIFT FOCUS ZOOM
– – –
BLANK ASPECT LASER
PREVIOUSNEXT
MOUSE
ESC MENU
POSITION RESET AUTO
MAGNFY PinP VOLUME ON
FREEZE MUTE
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
ASPECT button
Using The Automatic Adjustment Feature
memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input.
1Press the AUTO button.
■At a RGB signal
The Vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and horizontal size (H SIZE) will be automatically adjusted.
memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.
■At a video signal
The signal type mode best suited for the respective input signal will be selected automatically.
memo This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function.
© 3M 2004 3M™ Multimedia Projector X70/X80
LASER INDICATOR
STANDBY/ON VIDEO RGB
+ + +
LENS SHIFT FOCUS ZOOM
– – –
BLANK ASPECT LASER
PREVIOUSNEXT
MOUSE
AUTO button
ESC | MENU |
| ||
POSITION | RESET | AUTO | ||
MAGNFY | PinP | VOLUME | ||
ON |
|
|
|
|
| FREEZE | MUTE | ||
OFF |
|
|
|
|
| KEYSTONE SEARCH | |||
| 1 | 2 | 3 |
|
| ID CHANGE |
|
17