Interlink electronic X70/X80 manual Screen Menu, Menu Position

Page 31

Multifunctional Settings (continued)

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN

BLANK

BLACK

PICTURE-1

START UP

ORIGINAL

PICTURE-2

MyScreen

 

INPUT

MyScreen SIZE

x1

AUTO

MyScreen LOCK

TURN OFF

SCREEN

MENU POSITION

 

OPTION

MESSAGE

TURN ON

NETWORK

RESET

 

: SELECT

 

 

Item

Description

Select a type of the BLANK screen using the / buttons. : MyScreen ￿ ORIGINAL ￿ BLUE ￿ WHITE ￿ BLACK

The BLANK screen is the screen, which is displayed by pressing the BLANK button. The MyScreen is the screen you can register a desired screen, and the

BLANK ORIGINAL is the existing standard screen. The BLUE, the WHITE and the

BLACK are the non-pattered (plain) screens in each color.

memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes.

memo For the MyScreen, please refer to the item “MyScreen” in this table.

Select a type of the START UP screen using the / buttons. : MyScreen ￿ ORIGINAL ￿ TURN OFF

The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal.

The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. When the TURN OFF is selected,

START UP the BLUE is used.

memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK after several minutes. If also the BLANK screen is the MyScreen or the ORIGINAL, it will change to the BLACK screen. memo About the MyScreen, please refer to the item “MyScreen” in this table. About the BLUE, BLACK and BLANK screens, please refer to the item “BLANK” in this table.

MyScreen

Pressing the (or the ENTER) button starts the MyScreen registration. Please

see the flow chart on the following page.

 

 

 

 

 

 

 

 

 

MyScreen SIZE

Select the size of the MyScreen using the

/

buttons. :

x1 ￿ FULL

 

 

 

 

 

 

 

 

 

Select the TURN ON or the TURN OFF using the

/ buttons.:

MyScreen LOCK

TURN ON ￿ TURN OFF

 

 

The TURN ON disables the operation of the item “MyScreen” of this SCREEN

 

menu.

 

 

 

 

 

 

 

Adjust the menu position using the / /

/

buttons. :

 

Up

 

 

 

￿

 

 

MENU POSITION

Left ￿ + ￿ Right

 

 

 

￿

 

 

 

Down

 

 

 

memo To finish this operation, press the ESC button but not the button.

 

 

 

(This table is continued to the following page.)

© 3M 2004 3M™ Multimedia Projector X70/X80

31

 

Image 31
Contents X70/X80 Preparation Projector FeaturesContents Page Page Arrangement Setting UpPage Connecting Your Devices Page VCR/DVD Player Projector If using a s-video signalIf using a component signal If using a Scart RGB inputPage About The Laser Pointer Remote ControlPutting Batteries Page + + + Using The Mouse/Keyboard Control FunctionPage Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsMain Menu PICTURE-1 Menu MY Memory PICTURE-1 MenuSize PhasePICTURE-2 Menu PositionVideo NR Input MenuInput Menu Auto Menu AdjustPower OFF Power onSearch Auto MenuMenu Position Screen MenuScreen Menu How to register your picture as the MyScreenOption Menu Option Menu Network Menu SetupDhcp Ex. Case of IP Address = Network Setting UpLamp Replacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Not been properly fixed Phenomena That May Easily Be Mistaken For Machine DefectsSound is muted Phenomena That May Easily Be Mistaken For Machine DefectsSpecification SpecificationsNot Included with Basic Packet Part Number AccessoriesAccessories Part Number How to OrderIntended Use