Interlink electronic X70/X80 manual PICTURE-2 Menu, Position, Phase, Size

Page 26

Multifunctional Settings (continued)

PICTURE-2 Menu

With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

memo This menu cannot be selected at a M1-D signal.

MENU

MAIN

V POSITION

20

PICTURE-1

H POSITION

142

PICTURE-2

H PHASE

31

INPUT

H SIZE

1344

AUTO

OVER SCAN

95

SCREEN

RESET

 

OPTION

 

 

NETWORK

 

 

: SELECT

 

 

Item

Description

 

 

 

 

 

Adjust the vertical position using the

/

buttons. :

V POSITION

Up ￿ Down

 

 

 

memo This item can be selected only at a RGB signal.

 

 

 

 

Adjust the horizontal position using the

/ buttons. :

H POSITION

Left ￿ Right

 

 

 

memo This item can be selected only at a RGB signal.

 

 

 

Adjust the horizontal phase to eliminate flicker using the / buttons. :

H.PHASE

Right ￿ Left

 

 

memo This item can be selected only at a RGB signal or a component video

 

 

signal other than a COMPONENT port input of 525i/625i/SCART RGB.

 

 

 

 

 

Adjust the horizontal size using the

/

buttons. :

 

Large ￿ Small

 

 

H SIZE

memo This item can be selected only at a RGB signal.

memo When this adjustment is excessive, the picture may not be displayed

 

 

correctly. In such a case, please reset the adjustment pressing the RESET

 

button during this operation.

 

 

Adjust the over-scan ratio using the / buttons. : Small ￿ Large

OVER SCAN memo This item can be selected only at a video signal.

memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

Select the EXECUTE using the button to reset the PICTURE-2 menu items. :

RESET

EXECUTE ￿ CANCEL

The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the item “H PHASE” is not reset.

26

© 3M 2004 3M™ Multimedia Projector X70/X80

Image 26
Contents X70/X80 Projector Features PreparationContents Page Page Setting Up ArrangementPage Connecting Your Devices Page If using a Scart RGB input If using a s-video signalIf using a component signal VCR/DVD Player ProjectorPage Putting Batteries Remote ControlAbout The Laser Pointer Page Using The Mouse/Keyboard Control Function + + +Page Selecting An Input Signal OperatingAt a RGB signal not M1-D At a video signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signalAdjusting The Picture Position Correcting The Keystone DistortionTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Using The Magnify Feature Freezing The ScreenDisplaying The Child Window Selecting An Audio InputMultifunctional Settings Using The Menu FunctionsMain Menu PICTURE-1 Menu PICTURE-1 Menu MY MemoryPosition PhasePICTURE-2 Menu SizeInput Menu Video NRInput Menu Power on AdjustPower OFF Auto MenuAuto Menu SearchScreen Menu Menu PositionHow to register your picture as the MyScreen Screen MenuOption Menu Option Menu Dhcp SetupNetwork Menu Network Setting Up Ex. Case of IP Address =Lamp Case of replacement by yourself Replacing The LampAir Filter Caring For The Air FilterCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Phenomena That May Easily Be Mistaken For Machine Defects Not been properly fixedPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedSpecifications SpecificationHow to Order AccessoriesAccessories Part Number Not Included with Basic Packet Part NumberIntended Use