Multifunctional Settings (continued)
SCREEN Menu (continued)
Item | Description |
Select the TURN ON or the TURN OFF using the 
/ 
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the following message function works. The message of the “AUTO IN PROGRESS” for the auto adjustment. The message of the ”NO INPUT IS DETECTED”
MESSAGE The message of the ”SYNC IS OUT OF RANGE” The message of the ”Searching …”
The message of the “Detecting …”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio. The indication of “FOCUS” by adjusting the focus.
| Select the EXECUTE using the button to reset the SCREEN menu items. : |
RESET | EXECUTE CANCEL |
| The items of the SCREEN menu are collectively returned to the initial setting. |
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu. 
Press the 
button
The MyScreen menu appears.
Do you capture the picture from
the current screen?
MyScreen
Do you start capturing this picture?
ESC | :NO | ENT | :YES |
NO: Press the ESC/RESET button
If the ESC/RESET |
|
button is pressed ... | YES: Press the ENTER button |
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using 
/
/
/
buttons,
and press the ENTER button to register.
MyScreen
Move the capture area
as you want.
ESC 
:RETURN ENT :NEXT
Registering.
It takes about 1 minute to register.
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
My Screen
45%
MyScreen registration is finished.
If the picture registration failed,
the message of the right is displayed for a few seconds.
A capturing error has occurred.
Please try again.
32 | © 3M 2004 | 3M™ Multimedia Projector X70/X80 |
|