Interlink electronic X70/X80 manual Troubleshooting, Related Messages

Page 41

Troubleshooting

Related Messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.

memo Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

CHANGE THE LAMP

The time the lamp timer has counted is approaching

2000 hours.

 

AFTER REPLACING LAMP,

Preparation of a new lamp, and an early lamp change is

recommended. After you have change the lamp, please be sure

RESET THE LAMP TIMER.

to reset the lamp timer.

 

 

 

CHANGE THE LAMP

The time the lamp timer has counted is approaching

2000 hours, so a lamp change within ** hours is

 

AFTER REPLACING LAMP,

recommended.

When lamp usage reaches 2000 hours, the power will

RESET THE LAMP TIMER.

automatically be turned off.

 

THE POWER WILL TURN OFF

Please change the lamp by referring to the section Lamp.

After you have changed the lamp, please be sure to reset the

AFTER ** hr.

lamp timer.

 

 

 

CHANGE THE LAMP

As the time the lamp timer has counted has reached

 

AFTER REPLACING LAMP,

2000 hours, the power will soon be automatically

turned off.

RESET THE LAMP TIMER.

Please immediately turn the power off, and change the lamp by

 

THE POWER WILL TURN OFF

referring to the section Lamp. After changing the lamp, please

be sure to reset the lamp timer.

AFTER 0 hr.

 

 

 

 

(This table is continued to the following page.)

NOTE A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this projector.

© 3M 2004 3M™ Multimedia Projector X70/X80

41

Image 41
Contents X70/X80 Preparation Projector FeaturesContents Page Page Arrangement Setting UpPage Connecting Your Devices Page If using a component signal If using a s-video signalIf using a Scart RGB input VCR/DVD Player ProjectorPage Putting Batteries Remote ControlAbout The Laser Pointer Page + + + Using The Mouse/Keyboard Control FunctionPage Operating Selecting An Input SignalAt a M1-D signal Using The Automatic Adjustment FeatureAt a RGB signal not M1-D At a video signal At a RGB signalCorrecting The Keystone Distortion Adjusting The Picture PositionTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsMain Menu PICTURE-1 Menu MY Memory PICTURE-1 MenuPICTURE-2 Menu PhasePosition SizeVideo NR Input MenuInput Menu Power OFF AdjustPower on Auto MenuSearch Auto MenuMenu Position Screen MenuScreen Menu How to register your picture as the MyScreenOption Menu Option Menu Dhcp SetupNetwork Menu Ex. Case of IP Address = Network Setting UpLamp Replacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Not been properly fixed Phenomena That May Easily Be Mistaken For Machine DefectsSound is muted Phenomena That May Easily Be Mistaken For Machine DefectsSpecification SpecificationsAccessories Part Number AccessoriesHow to Order Not Included with Basic Packet Part NumberIntended Use