Interlink electronic X70/X80 manual Input Menu, Video NR

Page 27

Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

 

 

MAIN

COLOR SPACE

AUTO

PICTURE-1

COMPONENT

COMPONENT

PICTURE-2

VIDEO

AUTO

INPUT

3D-YCS

TURN OFF

AUTO

VIDEO NR

LOW

SCREEN

P. INP. INPUT

VIDEO

OPTION

P. INP. POSIT.

 

NETWORK

POWERUP INPUT RGB

: SELECT

 

 

Item

Description

Select a color space mode using the / buttons. : AUTO ￿ RGB ￿ SMPTE240 ￿ REC709 ￿ REC601

Selecting the AUTO automatically selects the optimum mode.

COLOR SPACE memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i/625i/SCART RGB. memo The AUTO operation may not work well at some signals. In such a case, select the SMPTE240 or the REC709 for a HDTV signal.

Select a function of COMPONENT port using the / buttons. :

COMPONENT ￿ SCART RGB

COMPONENT When the SCART RGB is selected, the COMPONENT port function as a port for a SCART RGB signal input. Please refer to the section “Connecting Your Devices”.

Select a signal type mode using the / buttons. :

AUTO ￿ NTSC ￿ PAL ￿ SECAM ￿ NTSC4.43 ￿ M-PAL ￿ N-PAL Selecting the AUTO automatically selects the optimum mode.

memo This item is performs only at a video signal from the VIDEO port or the S-

VIDEO VIDEO port. For a component video signal, the signal type is identified automatically independently of this function.

memo The AUTO operation may not work well at some signals. If the picture becomes unstable (ex. a irregular picture, a color lack), please select the mode depending on the input signal.

Select the TURN ON or the TURN OFF using the / buttons. :

TURN ON ￿ TURN OFF

When the TURN ON is selected, the 3D-YCS mode works for a completely still

3D-YCSimage, or images with few motions.

VIDEO NR

memo This item performs only at a video signal of NTSC3.58.

memo When this function performs, the setting of the item “VIDEO NR” of this INPUT menu is not effective.

Select a noise reduction level using the / buttons. :

HIGH ￿ MIDDLE ￿ LOW

The noise on screen is reduced according to the selected level.

memo This item performs only at a video signal from the VIDEO port or the S- VIDEO port. At a video signal of NTSC3.58, this function performs only when the TURN OFF is selected to the item “3D-YSC” of this INPUT menu.

memo When this adjustment is excessive, certain degradation may appear on the picture.

(This table is continued to the following page.)

© 3M 2004 3M™ Multimedia Projector X70/X80

27

Image 27
Contents X70/X80 Preparation Projector FeaturesContents Page Page Arrangement Setting UpPage Connecting Your Devices Page VCR/DVD Player Projector If using a s-video signalIf using a component signal If using a Scart RGB inputPage Remote Control About The Laser PointerPutting Batteries Page + + + Using The Mouse/Keyboard Control FunctionPage Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionAdjusting The Volume Muting The SoundTemporarily Blanking The Screen Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsMain Menu PICTURE-1 Menu MY Memory PICTURE-1 MenuSize PhasePICTURE-2 Menu PositionVideo NR Input MenuInput Menu Auto Menu AdjustPower OFF Power onSearch Auto MenuMenu Position Screen MenuScreen Menu How to register your picture as the MyScreenOption Menu Option Menu Setup Network MenuDhcp Ex. Case of IP Address = Network Setting UpLamp Replacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Not been properly fixed Phenomena That May Easily Be Mistaken For Machine DefectsSound is muted Phenomena That May Easily Be Mistaken For Machine DefectsSpecification SpecificationsNot Included with Basic Packet Part Number AccessoriesAccessories Part Number How to OrderIntended Use