Meridian Audio FDP-DILA3 warranty Logo menu, Position menu, Decoder menu, Capture menu

Adjustments and Settings Using Menus

“Clamp”	This can be used if the screen of the PC/
	workstation is unstable in that it dims and
	brightens.
	Set the position of the clamp pulse to
	Back porch (“BP”) or Sync tip (“SP”).
	Normally, “BP” is used.
	Setting value: “ST”, “BP”	[“BP”]
“Sync Level”	Although the inputted image signal is
	adjusted so that synchronization occurs
	automatically, this changes by changing
	the “Sync level” setting.

Setting can be made by selecting “Low” (weaker), “Std” (factory set) or “High” (stronger).

Setting value: “Low”, “Std”, “High” [“Std”]

*“1.1” : The image is displayed at the inputted resolution.

“Panel” : The picture image projected is virtually enlarged to the full screen size if the inputted resolution is smaller than (1400 pixels x 1050 pixels).

“Aspect” : While maintaining the original aspect ratio, the video image projected is virtually enlarged until either the horizontal or vertical side reaches the full size (1400 pixels x 1050 pixels).

When there is no image signal inputted

Adjustment item (press ▲ / ▼)	Adjustment content (press ◀ / ▶)
“Sync level”	Although the inputted image signal is
	adjusted so that synchronization occurs
	automatically, this changes by changing
	this setup.
	Setting can be made by selecting “Low”
	(weaker), “Std” (factory set) or “High”
	(stronger).
	Setting value: “Low”, “Std”, “High” [“Std”]

6 “Logo” menu

Adjustment item (press ▲ / ▼)		Adjustment content (press ◀ / ▶)
“Logo disp.”	Sets whether to indicate the user set logo
	(captured image: “Logo disp.”) when the
	projector starts up.
				[“ON”]
“Logo pos.”	Sets the position of the user set logo (cap-
	tured image: “Logo disp.”) when the pro-
	jector starts-up. Re-setting can be per-
	formed only when the logo has been
	eliminated.
Set value:
“Logo pos.”:	¥ ¥ ¥		¥ ¥	¥ ¥ ¥
	[				]
“Back color”	Selects the background color of the user
	set picture (captured image: “Logo disp.”).
				[“Black”]
	Re- setting can be performed only when
	the logo has been eliminated.
“Logo delete”	Deletes the user set logo (captured
	image: “Logo disp.”). Deletion takes a few
	seconds.
	[ Press the ENTER button to delete.
“Capture menu”	You can project the picture from the video
	player or PC and capture the picture you

like.

The captured picture can be displayed as a logo display when the projector starts up.

[ Press the ENTER button to go into the “Capture menu” screen.

4“Position” menu

Adjusts the menu display position. Press the (▲ / ▼) CURSORS to set the horizontal/vertical position of the menu display.

Set Value:
	¥ ¥ ¥	¥ ¥	¥ ¥ ¥
“Menu pos.”:	[
				]
“Horiz. disp. pos.”	: Varies with signals.
“Vert. disp. pos.”	: Varies with signals.
“Horiz. DIST pos.”	: - 8 ~ + 7 [0]

5“Decoder” menu

Press the (▲ / ▼) CURSOR buttons to choose the “Decoder” of the image signals. Normally, “Auto” is selected. When “Auto” does not function well, select the appropriate decoder accordingly.

Set Value: “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “SECAM”

[“AUTO”]

7 “Capture menu”

Adjustment item (press ▲ / ▼)		Adjustment content (press ◀ / ▶)
“Menu pos.”	Adjusts the display position of the cap-
	ture menu.
Set value:
“Menu pos.”:
	¥ ¥ ¥		¥ ¥	¥ ¥ ¥
	[
					]
“Horiz. move”	The position of the picture that you want
	to capture can be moved left/right with the
	CURSOR buttons (◀ / ▶).
“Vert. move”	The position of the picture that you want
	to capture can be moved up/down with
	the CURSOR buttons (▲ / ▼).
“Horiz. size”	The width of the picture that you want to
	capture can be set by the CURSOR but-
	tons (◀ / ▶).
“Vert. size”	The height of the picture that you want to
	capture can be set by the CURSOR but-
	tons (▲ / ▼).
“Capture start”	After setting all the items of the capture
	menu, image capture starts.
	❈ Note that images already inputted will
		be deleted.
	[ Press the ENTER button to start.

37