Meridian Audio FDP-DILA3 warranty Controls and Features, Front Side/Top Surface/Left Side

Controls and Features

Front Side/Top Surface/Left Side

3. Pull off top lens cover to access focus and zoom

1.Remove side cover to access control panel

2.AC power terminal

8.Zoom and Focus ring

5.Anamorphic Lens

Adjustable foot

3.Remove four end screws to access input board

Filter

7. Remote sensor

6. Air vents

4. Foot Lever

Do not open

1.Control Panel

For details, See ‘Control Panel on the Projector’.

2.AC Power Input Terminal

This is where the supplied power cord is connected to.

6.Air inlets (on the front, right, and bottom side of

projector)

The air inlets absorb air to cool the internal components of the projector. Do not block or allow warm air to blow into them as it may cause damage.

*The air inlet filter on the right side cannot be removed. Please clean the filter regularly with eg, a vacuum cleaner.

3. Top and side covers

Remove to access lens and inputs

4.Foot Lever (for front adjustable foot)

Use when extending and retracting the front foot.

5.Lens

The lens is a 1.3 x manual zoom lens. FDP-DILA3 uses 1:1 fixed lens with an anamorphic lens attachment.

7.Remote Sensor (Front)

When operating with the remote control, aim it towards this sensor. (☞ page 18)

*A remote sensor is also provided at the rear of the projec- tor.

8.Zoom and Focus Ring

Used to manually focus and zoom the image on the screen.

7