Onkyo 29344937, HT-S6200 instruction manual Rear Panel

Front & Rear Panels—Continued

Rear Panel

a b c de f g h i

j k l m n o p

aDIGITAL IN COAXIAL 1 and 2

These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or DVD/BD player. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 43.

bDIGITAL IN OPTICAL 1 and 2

These optical digital audio inputs are for connecting components with an optical digital audio output, such as a CD player or DVD/BD player. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 43.

cCOMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for connecting components with a component video output, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Input Setup” on page 42.

dCOMPONENT VIDEO OUT

This RCA component video output is for connecting a TV or projector with a component video input.

qr

eHDMI IN 1–4 and OUT

HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video. The HDMI inputs are for connecting components with an HDMI output, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “HDMI Input Setup” on page 41.

The HDMI outputs are for connecting a TV or projector with an HDMI input.

fAM and FM ANTENNA

The AM push terminals are for connecting an AM antenna. The FM jack is for connecting an FM antenna.

gMONITOR OUT

The composite video jack should be connected to a video input on your TV or projector.

hUNIVERSAL PORT

This jack is for connecting the component with the Universal Port connector such as UP-A1 series Dock.

iFRONT L/R, CENTER, SURR L/R, and SURR BACK L/R SPEAKERS

These terminal posts are for connecting the front L/R, center, surround L/R, and surround back L/R speakers.

The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers, respectively, or used to bi-amp front Speakers. See “Bi-amping the Front Speakers” on page 22.

The SURR BACK L/R terminals can be used to connect the front high L/R speakers. See “Speaker Settings” on page 44.

12