Onkyo HT-S6200, 29344937 instruction manual Miscellaneous Volume Setup

Advanced Setup—Continued

Miscellaneous (Volume) Setup

This section explains the items on the “Miscellaneous” menu.

1	Press the [RECEIVER] button followed by
	the [SETUP] button.
2	Use the Up and Down [q]/[w] buttons to
	select “6. Miscellaneous”, and then press
	[ENTER].
3	Press the [ENTER] button.
4	Use the Up and Down [q]/[w] buttons to
	select an item, and use the Left and Right
	[e]/[r] buttons to change it.
	The items are explained below.
5	When you’ve finished, press the [SETUP]
	button.

Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Volume Setup

■MaxVolume

With this setting, you can limit the maximum volume. The Maximum Volume range is “Off”, 79 to 30.

■POnVol

With this preference, you can specify the volume setting to be used each time the AV receiver is turned on.

The range is “Last”, “Min”, 1 to 79 or “Max”.

To use the same volume level that was used when the AV receiver was turned off, select “Last”.

The “POnVol” cannot be set higher than the “Max Volume” setting.

■HP Level

With this preference, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones. The headphones level can be set from –12 dB to +12 dB.

77