Onkyo HT-S6200 Listening to the Radio, AM/FM Frequency Step Setup, Use the Left and Right e/r

Listening to the Radio

AM/FM Frequency Step Setup

RECEIVER

4 Use the Up and Down [q]/[w] buttons to select “FM/AM” (North American models) or “AM Freq” (Asian models).

(North American models)

(Asian models)

ENTER

SETUP

qwer

5	Use the Left and Right [e]/[r]
	buttons to select:

For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

2 Use the Up and Down [q]/[w] buttons to select

“7. HardwareSetup”, and then press [ENTER].

3	Use the Up and Down [q]/[w]
	buttons to select “7-2. Tuner”,

and then press [ENTER].

(North American models) 200k/10k:

Select if 200 k/10 k steps are

used in your area. 50k/9k: Select if 50 k/9 k steps are

used in your area.

(Asian models)

10kHz: Select if 10 kHz steps are used in your area.

9kHz: Select if 9 kHz steps are used

	in your area.
6	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

53