Onkyo HT-S6200, 29344937 Connecting Components with Hdmi, About Hdmi, Supported Audio Formats

Page 27

Connecting the AV receiver—Continued

Connecting Components with HDMI

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, or multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components will display a picture.

The AV receiver’s HDMI interface is based on the following standard:

Deep Color, x.v. Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

•2-channel linear PCM (16/20/24 bit/32–192 kHz)

•Multichannel linear PCM (7.1 ch, 32–192 kHz)

•Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your DVD player must be able to output these formats from its HDMI OUT.

■Onkyo for System Control

, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, opera-

tion with components other than -compatible components cannot be guaranteed.

•Set “HDMI Ctrl” to “On” (page 79).

•See “Controlling a TV” (page 86) and “Controlling a DVD Player, or DVD Recorder” (page 87) for operation.

Note:

Do not connect the -compatible component more than the following number to the HDMI input terminal so that the linked operations work properly.

•DVD/BD player is up to three.

•DVD/BD recorder is up to three.

•Cable/Satellite Set-top box is up to four.

Do not connect the AV receiver to the other AV receiver /AV amplifier via HDMI.

When the -compatible component more than the above-mentioned is connected, the linked operations are not guaranteed.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Led by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents HT-S6200 Avis Important Safety InstructionsBatteries and Heat Exposure Warning PrecautionsPower Preventing Hearing Loss CautionSpeaker Precautions Package Contents Package Contents Contents Connections FeaturesAmplifier ProcessingFeatures Multiroom Capability Main RoomZone 2 Room Front Panel Front & Rear PanelsDisplay Front & Rear PanelsRear Panel VCR/DVR IN/OUT Remote ControlTV/TAPE IN/OUT CBL/SATSubwoofer SKW-770 Speaker PackageSpeaker Package Keyhole slotsSpeaker terminals Remote Controller Installing the BatteriesAiming the Remote Controller Controlling the AV receiver Remote ControllerEnjoying Home Theater About Home TheaterSpeaker Connection Precautions Connecting the AV receiverConnecting Your Speakers Speaker ConfigurationPush terminals Connecting the AV receiverConnecting the Speaker Cables Terminal postsUsing the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Bi-amping Speaker Hookup Bi-amping the Front SpeakersAttach the FM antenna, as shown North American models Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter About AV Connections Optical Digital Jacks AV Connection Color CodingAV Cables and Jacks Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsAbout Copyright Protection Connecting Components with HdmiAbout Hdmi Supported Audio FormatsStep Video SignalsAudio Signals Making Hdmi ConnectionsConnecting a TV or Projector Video ConnectionAudio Connection Connecting a DVD/BD Player Connecting a VCR or DVR for Playback Make the audio connection a Connecting a VCR or DVR for RecordingComponent Video in 2 CBL/SAT Connecting a Camcorder, Game Console, or Other Device Connecting a Portable Audio playerMake the video connection a Make the audio connection a CD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableConnecting a Cassette, CDR, MiniDisc, or DAT Recorder If Your iPod or iPhone Don’t Support Video Connecting an RI DockNot all iPod models output video If Your iPod or iPhone Supports VideoConnecting a Dock with the Universal Port connector Direct Change Connecting Onkyo u ComponentsConnecting the Power Cord Auto Power On/StandbyTurning On the AV receiver Turning On and StandbyUp and Running in a Few Easy Steps Press the Setup button First Time SetupHdmi Input Setup Followed by the Setup buttonComponent Video Input Setup First Time SetupSetup closes Digital Input SetupUse the Up and Down q/ w but Speaker SettingsButtons to select Sp Type, Use the Left and Right e/ rChanging the Input Display Second measurement point Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions First measurement pointUsing Audyssey 2EQ Using a Powered Subwoofer Error MessagesTo Retry the Room Correction and Speaker Setup Changing the Speaker Settings ManuallySelect a listening mode and enjoy Basic OperationsBasic AV receiver Operation Bass Adjusting the Bass & TrebleBasic Operations Displaying Source InformationSetting the Display Brightness Muting the AV receiver Using the Sleep TimerUsing Headphones Using the Music Optimizer Specifying the Digital Signal FormatAuto default Use the Left and Right e/r AM/FM Frequency Step SetupListening to the Radio North American models Asian modelsListening to the Radio Using the TunerTuning into AM/FM Radio Stations Listening to the RadioDisplaying AM/FM Radio Information Tuning into Stations by FrequencyPresetting AM/FM Stations Deleting PresetsSelecting Presets Made for About the UP-A1 series DockCompatible iPod/iPhone models Putting Your iPod/iPhone in the DockControlling iPod/iPhone Using Your iPod or iPhone models Alarm ClockCharging Your iPod or iPhone models Battery UP-A1 series Dock for iPod/iPhoneStatus messages Recording Selecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesUsing the Listening Modes Listening Modes Available for Each Source FormatMono/Multiplex Sources Available Listening Modes Stereo SourceDTS/DTS-HD Channel SourcesDTS-ES DTS-ES Discrete/Matrix SourcesAbout the Listening Modes Onkyo Original DSP Modes Advanced Setup Common Procedures in Setup MenuSpeaker Setup Sp Distance Speaker Distance Advanced SetupUse the Down w button to select Ch, and then use the Left Equalizer Equalizer SettingsLeft and Right e/ r buttons to adjust the level at that Level Cal Speaker Levels CalibrationDolby EX Audio AdjustAudio Adjust Mux/Mono Multiplex/Mono DolbyD Theater-Dimensional DTS Neo6 MusicAudyssey Using the Audio Settings Speaker Layout Audyssey Dynamic VolumeCinemaFILTER Music OptimizerAssigning Listening Modes to Input Sources Source Setup IntelliVolumeSync Volume Setup Miscellaneous Volume SetupHardware Setup Remote IDTuner Hdmi Ctrl Power CtrlLipSync XvColorZone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting Your Zone 2 Speakers to an Amp in ZoneIf you’ve connected your Zone 2 speakers to the AV Setting the Powered ZoneSettings, and then press Enter Use the Up and Down q/wUsing Zone Controlling Zone 2 with the Remote ControllerControlling Zone 2 from the AV receiver Muting Zones Adjusting the Volume of ZonesPreprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Controlling Other Components Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Resetting the Remote ControllerControlling a TV Controlling a DVD Player, or DVD Recorder Controlling a VCR or PVR Controlling a Satellite Receiver or Cable Receiver Disc +/- button Controlling a CD PlayerWhen Using an RI Dock Controlling an RI DockPlaylist e/r button Reverse Play t button Controlling a Cassette RecorderPrevious and Next 7/6 buttons Rewind and Fast Forward 5/4 buttonsTroubleshooting Troubleshooting There’s no video Remote controller doesn’t workCan’t control other components There’s no soundU functions don’t work Sound changes when I connect my headphonesCan’t record How do I change the language of a multiplex sourceTuner Section SpecificationsAmplifier Section Video SectionCenter Speaker SKC-670 SpecificationsPowered Subwoofer SKW-770 Front Speaker SKF-670Memo 3 4 4 9 3

HT-S6200, 29344937 specifications

The Onkyo HT-S6200 is a versatile and powerful home theater system that delivers an impressive audio experience for music and movie enthusiasts alike. One of its standout features is the 7.1-channel surround sound configuration, which creates an immersive sound environment, enveloping listeners with crystal-clear audio. This configuration is especially effective in large rooms, providing an enveloping sound that enhances the viewing experience for everything from action-packed movies to nuanced dramas.

The system includes a powerful AV receiver, model TX-SR313, boasting a variety of connectivity options. With six HDMI inputs, it allows users to connect multiple devices such as Blu-ray players, gaming consoles, and streaming devices easily. The receiver supports 4K video pass-through, making it future-proof for high-definition content and ideal for users looking to enjoy the latest in home entertainment.

Another key aspect of the HT-S6200 is its implementation of Dolby TrueHD and DTS-HD Master Audio technologies. These formats deliver lossless audio, ensuring that soundtracks and sound effects are reproduced with stunning fidelity, replicating a cinema-like experience at home. Furthermore, the system features Dolby Pro Logic IIz, which enhances the surround sound experience by creating an additional layer of depth through front height channels.

The Onkyo HT-S6200 also integrates a user-friendly graphical user interface, making setup and operation straightforward. High-quality speaker components, including a powered subwoofer with a 12-inch driver, produce deep, powerful bass, providing an excellent anchor for the overall sound stage. The satellite speakers are designed to deliver clear midrange and high frequencies, ensuring every dialogue and musical note is distinct and engaging.

With its elegant design, the HT-S6200 fits seamlessly into any home décor, while also providing robust performance. The system also supports Onkyo’s exclusive AccuEQ room acoustic calibration technology, which automatically adjusts the sound settings to suit the specific acoustics of a room. This feature enhances the listening experience by optimizing audio playback according to the user’s environment.

In summary, the Onkyo HT-S6200 combines advanced audio technologies, versatile connectivity options, and user-friendly features to create a compelling home theater system. Whether enjoying a thrilling movie night or listening to music, this system promises to elevate any audio experience, making it a worthy investment for any home entertainment enthusiast.
Top Page Image Contents